|
08-21-2016, 02:11 PM
|
#1 |
|
Moderator
 Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
My bed is a pond
65 LWB fleet. My bed is holding water after a rain. A lot of water. It will drain really slowly over a couple of days (drip at a time) as well as evaporate. The bed is a bit canted so it pools in the front passenger corner. I guess I need a drain hole. Should I put it through the corner of the wood, the front panel, or the bed side?
|
|
|
|
08-21-2016, 03:54 PM
|
#2 |
|
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: My bed is a pond
Had a quick search for "water in bed" and found someone with a similar issue on a 67-72. Looks like there is supposed to be drain holes in those trucks, so I'll replicate them on mine.
http://67-72chevytrucks.com/vboard/s...d.php?t=494735 |
|
|
|
|
08-21-2016, 04:02 PM
|
#3 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: My bed is a pond
I'd go through the wood. Steel will rust after drilling. Best to go in the 3/4" range so you can poke your finger through now and then when it begins to clog up with leaves and such. Both sides of the box so it can drain either side.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
|
08-21-2016, 06:39 PM
|
#4 |
|
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: My bed is a pond
Yes, it will be a lot quicker to drill through the wood, too!
|
|
|
|
|
08-22-2016, 12:23 AM
|
#5 |
|
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: My bed is a pond
Never had that problem! Partly cause the wood in my GMC's bed is 50 years old!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
08-22-2016, 06:49 AM
|
#6 |
|
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: My bed is a pond
Yeah, my bed wood is actually plastic TREX. Great for outdoors, also great at being waterproof... guess I should have cut a couple boards short! lol
|
|
|
|
|
08-22-2016, 11:20 AM
|
#7 |
|
Registered User
Join Date: Jun 2016
Location: Novato, CA
Posts: 519
|
Re: My bed is a pond
Jay do you park on a downslope? When you cut your trex did you follow Paul's measurements? They call for a drain channel every so often.
I'm considering options for doing my bed and was thinking about trex so I'm interested in this pooling problem.
__________________
1965 GMC 1000 SWB Fleetside L6 230 - SOLD Thanks everyone for the help over the years. Last edited by Praxiss454; 08-23-2016 at 02:15 AM. |
|
|
|
|
08-22-2016, 04:25 PM
|
#8 |
|
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
|
Re: My bed is a pond
I have never had that problem but that is probably because it no longer rains in Los Angeles.
|
|
|
|
|
08-22-2016, 09:02 PM
|
#9 |
|
Moderator
Join Date: Dec 2012
Location: ON, Canada
Posts: 2,176
|
Re: My bed is a pond
Level ground, but my truck is slightly tilted to the front like most stock suspension long boxes.
 Yes, used GMC Paul's cuts. Don't remember any drain cuts, just the cuts for the strips.   
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
