IA w/tb k-30 gas filler neck

[wahl4m]

i have a 82 chevy k-30 truck that has a 1 side only fuel tank that needs a gas filler neck w/mounting plate -this piece has a half round dish id call it- that has the gas cap in it ! mounts on a couple of risers off the truck drivers side frame/a vent and gas filler hose hooks to it ! mine is very rusty -not worth repairing ! does anybody have a nice one ??? thanks

[natedogg]

I have this.

[wahl4m]

im sorry maybe i didnt describe it right ! mine has a 90 degree elbow at the top and a plate on the back side ! it is a cab & chassis set-up w/ a masons box /will try and post pic tomorrow thanks guy !

[dh81k30]

Originally Posted by wahl4m

im sorry maybe i didnt describe it right ! mine has a 90 degree elbow at the top and a plate on the back side ! it is a cab & chassis set-up w/ a masons box /will try and post pic tomorrow thanks guy !

wahl4m,

I had to repair my filler neck not long ago. My problem appeared to be that someone had used radiator hose instead of fuel hose and the hose had split. Fortunately, I didn't have to replace the fill neck but I did spend an afternoon cutting and modifying things to enable remounting - works better now.

If your tank and fill neck are like mine, the vent is 5/8 inch and fill hose is 1 & 3/8 inches. Please make sure, if you are replacing the hose(s), that you use fuel rated hose.

I found this link when searching for info:

http://www.fillernecksupply.com/?gcl...FQYuaQodIyINHQ ,

maybe it has what you need.

Good luck,

[GonicGM]

82-up should be 2" filler hose/tank neck
81-back should be small neck.
better measure to be sure.
Sorry, I can't help on part