wrangler tank install ?????s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 10-22-2016, 02:50 PM

Getting ready to install the wrangler tank. with a 87 blazer sender and modern pump all as recommended on here. thanks guys!!
How are you guys installing it? The bed is off my 67 stepside shortbed. I cut a piece angle iron to makeshift a cross brace. Should in drop in since the bed is off or install from underneith. And is it ok to run nuts and bolts thru the pinch plater that runs along the middle of the tank or fab straps?
Pics would be great!!!!

Paul Y · 10-23-2016, 03:16 PM

Watching as this is on my list of Christmas upgrades.

P.

**michael bustamante** · 10-24-2016, 11:26 AM

cmon guys, i could use some help on this one. dont want to screw this one up

Low Elco · 10-24-2016, 01:14 PM

Look on my Yeller build thread. Made an angle frame and bolted through the pinch, with rubber pads for isolation. Be sure to bolt through on the outside of the friction weld line! Worked out well, and easy to pull the tank.

Low Elco · 10-24-2016, 01:20 PM

Touch on it here- might be more further in.

http://67-72chevytrucks.com/vboard/s...=501131&page=6

**mongocanfly** · 10-24-2016, 03:57 PM

I wouldn't risk drilling thru that pinch plate ..to much risk in creating a leak...I would use the straps..you could grab some off a wrangler at a wrecking yard...I would set it up like it mounts in the wrangler..

**michael bustamante** · 10-24-2016, 05:41 PM

did you mount from underneath or drop the tank in with the bed off?

Low Elco · 10-26-2016, 08:03 AM

its kind of a frame, the entire front rides on a piece of angle that's been relieved so that the pinch goes all the way in. it drops down about an inch. then you swing the back up and another angle bracket holds up the rear. Winds up with the tank roughly level with the top of the frame rails. Look in both threads in my sig, there's probably a good pic somewhere. Yeller is actually my dad's so it's up at his house. I've had the tank in and out 3-4 times since the truck's been built, easy peasy. I really just floated it where I wanted it on floorjack and lumber, then connected the dots with angle.

Low Elco · 10-26-2016, 08:08 AM

here ya go-

http://67-72chevytrucks.com/vboard/s...=624310&page=9

**michael bustamante** · 10-26-2016, 12:42 PM

thats what i needed thanks!!!

Low Elco · 10-26-2016, 12:55 PM

Glad I could help!

10-22-2016, 02:50 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	wrangler tank install ?????s Getting ready to install the wrangler tank. with a 87 blazer sender and modern pump all as recommended on here. thanks guys!! How are you guys installing it? The bed is off my 67 stepside shortbed. I cut a piece angle iron to makeshift a cross brace. Should in drop in since the bed is off or install from underneith. And is it ok to run nuts and bolts thru the pinch plater that runs along the middle of the tank or fab straps? Pics would be great!!!! Attached Images __________________ 1967custom

10-23-2016, 03:16 PM	#2
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 950	Re: wrangler tank install ?????s Watching as this is on my list of Christmas upgrades. P. __________________ Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet...

10-24-2016, 11:26 AM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: wrangler tank install ?????s cmon guys, i could use some help on this one. dont want to screw this one up __________________ 1967custom

10-24-2016, 01:14 PM	#4
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: wrangler tank install ?????s Look on my Yeller build thread. Made an angle frame and bolted through the pinch, with rubber pads for isolation. Be sure to bolt through on the outside of the friction weld line! Worked out well, and easy to pull the tank. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-24-2016, 01:20 PM	#5
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: wrangler tank install ?????s Touch on it here- might be more further in. http://67-72chevytrucks.com/vboard/s...=501131&page=6 __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-24-2016, 03:57 PM	#6
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: wrangler tank install ?????s I wouldn't risk drilling thru that pinch plate ..to much risk in creating a leak...I would use the straps..you could grab some off a wrangler at a wrecking yard...I would set it up like it mounts in the wrangler..

10-24-2016, 05:41 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: wrangler tank install ?????s did you mount from underneath or drop the tank in with the bed off? __________________ 1967custom

10-26-2016, 08:03 AM	#8
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: wrangler tank install ?????s its kind of a frame, the entire front rides on a piece of angle that's been relieved so that the pinch goes all the way in. it drops down about an inch. then you swing the back up and another angle bracket holds up the rear. Winds up with the tank roughly level with the top of the frame rails. Look in both threads in my sig, there's probably a good pic somewhere. Yeller is actually my dad's so it's up at his house. I've had the tank in and out 3-4 times since the truck's been built, easy peasy. I really just floated it where I wanted it on floorjack and lumber, then connected the dots with angle. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-26-2016, 08:08 AM	#9
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: wrangler tank install ?????s here ya go- http://67-72chevytrucks.com/vboard/s...=624310&page=9 __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-26-2016, 12:42 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: wrangler tank install ?????s thats what i needed thanks!!! __________________ 1967custom

10-26-2016, 12:55 PM	#11
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: wrangler tank install ?????s Glad I could help! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.