69 side mirror screws giving me a FIT! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mhussnatter · 11-08-2016, 06:42 PM

Ok I can not believe this but two of the side mirror screws on one side came out but we're very difficult and the third the Phillip head stripped so I tried to drill through it and use an extractor... No luck it will not budge. The other side I tried an impact driver and None of them will budge... One again stripped and same result. These screws seem like they are aluminum or some type of cheep steel and I am just at a loss on how to remove them without ruining the threads inside the door panel

projectking · 11-08-2016, 07:07 PM

I hit screws of that diameter repeatedly with PB Blaster and use a hand impact to break free, pneumatic tools destroy them as you found out!

Mhussnatter · 11-08-2016, 07:25 PM

Yep been trying PB and also my 20v cordless impact driver. Also tried applying heat.... Nothing will get them to budge at all

projectking · 11-08-2016, 09:39 PM

Next time try a hand impact it won't strip them out. http://www.cornwelltools.com/webcat/...r-Bit-Set.html

**LockDoc** · 11-09-2016, 10:58 AM

-
Drill the heads off and remove the mirror. The inside mounting plate will drop down inside the door. Fish it out and work on removing the screws on your work bench, it's a lot easier that way.

LockDoc

Mhussnatter · 11-09-2016, 06:38 PM

Awesome I think that should work. I didn't realize there is a backing place inside the door I just figured there were threaded nuts that were attached to the inside of the door.
Thanks I will give that a try

palallin · 11-09-2016, 10:16 PM

The maintenance schedule should have recommended removing these screws every year or 12,000 miles and lubing them to keep them freed up ;-)

11-08-2016, 06:42 PM	#1
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	69 side mirror screws giving me a FIT! Ok I can not believe this but two of the side mirror screws on one side came out but we're very difficult and the third the Phillip head stripped so I tried to drill through it and use an extractor... No luck it will not budge. The other side I tried an impact driver and None of them will budge... One again stripped and same result. These screws seem like they are aluminum or some type of cheep steel and I am just at a loss on how to remove them without ruining the threads inside the door panel

11-08-2016, 07:07 PM	#2
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: 69 side mirror screws giving me a FIT! I hit screws of that diameter repeatedly with PB Blaster and use a hand impact to break free, pneumatic tools destroy them as you found out! __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

11-08-2016, 07:25 PM	#3
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	Re: 69 side mirror screws giving me a FIT! Yep been trying PB and also my 20v cordless impact driver. Also tried applying heat.... Nothing will get them to budge at all

11-08-2016, 09:39 PM	#4
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: 69 side mirror screws giving me a FIT! Next time try a hand impact it won't strip them out. http://www.cornwelltools.com/webcat/...r-Bit-Set.html __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

11-09-2016, 10:58 AM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,849	Re: 69 side mirror screws giving me a FIT! - Drill the heads off and remove the mirror. The inside mounting plate will drop down inside the door. Fish it out and work on removing the screws on your work bench, it's a lot easier that way. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-09-2016, 06:38 PM	#6
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	Re: 69 side mirror screws giving me a FIT! Awesome I think that should work. I didn't realize there is a backing place inside the door I just figured there were threaded nuts that were attached to the inside of the door. Thanks I will give that a try

11-09-2016, 10:16 PM	#7
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,238	Re: 69 side mirror screws giving me a FIT! The maintenance schedule should have recommended removing these screws every year or 12,000 miles and lubing them to keep them freed up ;-) __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.