2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ebernst · 11-11-2016, 07:44 PM

We just finished up the exhaust on my '53. Ceramic long tube headers to an X pipe to MagnaFlow 11226 mufflers, with 2 1/2" tubes throughout. I'm super happy with how it turned out, and I'm even more excited to hear them bark once I start it up!

More photos here. Build thread here.

**Advanced Design** · 11-13-2016, 05:12 PM

Ebernst, that looks really good. Nice work!

**mr48chev** · 11-14-2016, 01:30 AM

That is a nice looking setup.

67 chevelle · 11-15-2016, 03:06 PM

x-pipe adds around 25 horse , so you should be somewhere around 425 , should accelerate quickly

my56chevytruck · 11-16-2016, 01:07 AM

Very nice looking. How do you like Magnaflow mufflers??

56hotrodred · 11-18-2016, 12:09 AM

I am starting to think about my exhaust although I don't even have an engine yet.

That is really close to what I was planning. I have not used an x pipe before but like The looks of it. I think there could be advantages over an h pipe.

Where are your hangars going? One after but not too far from the end of the long tubes, then one before muffle and one after, then tailpipes???

Good work!

mobileortho · 01-22-2017, 11:01 AM

I haven't found a set of long tube headers that fit my 50 with MMII ifs. Which ones did you use?

11-11-2016, 07:44 PM	#1
ebernst Registered User Join Date: Apr 2016 Location: Gig Harbor, WA Posts: 35	2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] We just finished up the exhaust on my '53. Ceramic long tube headers to an X pipe to MagnaFlow 11226 mufflers, with 2 1/2" tubes throughout. I'm super happy with how it turned out, and I'm even more excited to hear them bark once I start it up! More photos here. Build thread here. __________________ Here's my 1953 Chevy 3100 Build Thread and here's my website Classic Nation.

11-13-2016, 05:12 PM	#2
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] Ebernst, that looks really good. Nice work! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

11-14-2016, 01:30 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,710	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] That is a nice looking setup. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-15-2016, 03:06 PM	#4
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] x-pipe adds around 25 horse , so you should be somewhere around 425 , should accelerate quickly __________________ 68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive

11-16-2016, 01:07 AM	#5
my56chevytruck Registered User Join Date: Feb 2016 Location: Hebron Posts: 1,153	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] Very nice looking. How do you like Magnaflow mufflers?? __________________ RUBBER DOWN AND HIT THE ROAD!!! 1940 Ford Dlx Coupe 1969 Mach1

11-18-2016, 12:09 AM	#6
56hotrodred Registered User Join Date: Aug 2007 Location: Mountain View, Alberta, Canada Posts: 415	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] I am starting to think about my exhaust although I don't even have an engine yet. That is really close to what I was planning. I have not used an x pipe before but like The looks of it. I think there could be advantages over an h pipe. Where are your hangars going? One after but not too far from the end of the long tubes, then one before muffle and one after, then tailpipes??? Good work!

01-22-2017, 11:01 AM	#7
mobileortho Registered User Join Date: Sep 2008 Location: Hampton, VA Posts: 904	Re: 2 1/2" full exhaust install on my '53. [long tube headers and MagnaFlow Mufflers] I haven't found a set of long tube headers that fit my 50 with MMII ifs. Which ones did you use? __________________ Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.