The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > WIW

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-18-2017, 04:54 PM   #1
D.L.
Registered User
 
Join Date: Sep 2016
Location: Montgomery, TX.
Posts: 17
Need Advice on truck value

Hey guys trying to find my first 67-72 C10 owned a few square bodys when I was younger and always wanted one of these. Found this 1970 and I'm wondering some opinions on value? A/C, speedometer, wipers and horn don't work. Some rust spots on doors. Older paint job. 305 with 700R4. Hope this question is allowed and I know you cant tell much from pics but any ideas welcome.
Attached Images
     
D.L. is offline   Reply With Quote
Old 01-18-2017, 04:59 PM   #2
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Need Advice on truck value

Not as bad lookin' rig . The 305 kills it... looks like maybe a leaf sprung truck, however with a pretty straight body, if it's an original short bed and not a hacked up long bed... $5,000ish. If it's not an original short box... $3,500ish.

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 01-18-2017, 05:03 PM   #3
onebigjohn
Registered User
 
onebigjohn's Avatar
 
Join Date: Jan 2017
Location: Riverside Ca
Posts: 358
Re: Need Advice on truck value

Looks like it has two keys, One in the column and one in the dash?
onebigjohn is offline   Reply With Quote
Old 01-18-2017, 05:05 PM   #4
Camaroguy
Registered User
 
Camaroguy's Avatar
 
Join Date: Dec 2013
Location: Farmington NM
Posts: 655
Re: Need Advice on truck value

Any obvious rust in other places like the rockers, drip rail, cab corners, etc? Looks like the bottom of the doors have something going on. From the pics, it's a neat looking pickup. Is it a real short bed?

Pro's (for me):

Running-driving truck, tank has been moved, AC, sits decent, and has decent curb appeal.

Con's (for me):

305, doors cut for speakers, something going on with the front of the bed at the seam with the floor, bottom of doors.

If there isn't a bunch of rust, I would guess anything less than 12k is probably a good buy.
Camaroguy is offline   Reply With Quote
Old 01-18-2017, 05:09 PM   #5
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 20,031
Re: Need Advice on truck value

Quote:
Originally Posted by gasoline71 View Post
not as bad lookin' rig . The 305 kills it... Looks like maybe a leaf sprung truck, however with a pretty straight body, if it's an original short bed and not a hacked up long bed... $5,000ish. If it's not an original short box... $3,500ish.

Gary
x2
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
RIP FleetsidePaul
leddzepp is offline   Reply With Quote
Old 01-18-2017, 05:17 PM   #6
weq92f
Registered User
 
weq92f's Avatar
 
Join Date: Oct 2016
Location: Dallas Texas
Posts: 3,223
Re: Need Advice on truck value

I can tell you for certain that that dealer marks everything up 5k from what they have in it and they will not come off their prices.

Keep looking for a truck from an individual at a reasonable price.

-klb
__________________
67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi
07 335 sport turbo 6sp
94 Trans Am GT LT1 6sp posi -- sold after 22yrs
99 540 sport V8 6sp -- sold
73 240z L24 4sp -- given to friend
68 C10 step 350/350 3.73 open -- sold
weq92f is offline   Reply With Quote
Old 01-18-2017, 05:18 PM   #7
D.L.
Registered User
 
Join Date: Sep 2016
Location: Montgomery, TX.
Posts: 17
Re: Need Advice on truck value

No other rust real evident, Bed is beat up and has spray on bedliner. Heres a pic of underside, believe its a true short.
Attached Images
 
D.L. is offline   Reply With Quote
Old 01-18-2017, 05:20 PM   #8
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Need Advice on truck value

Went to their website and they want $19,000 for this rig. Not even close... but that's me. For that price that should be a show quality frame off rig with NO rust or any issues whatsoever.

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 01-18-2017, 05:21 PM   #9
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: Need Advice on truck value

I would say about $4k
JMHO
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 01-18-2017, 05:22 PM   #10
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: Need Advice on truck value

Oh yes ...

Hey D.L. ...

to the board and from Ohio
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 01-18-2017, 05:22 PM   #11
D.L.
Registered User
 
Join Date: Sep 2016
Location: Montgomery, TX.
Posts: 17
Re: Need Advice on truck value

There crazy on there price just wanting some other input. I was thinking 10k
D.L. is offline   Reply With Quote
Old 01-18-2017, 05:37 PM   #12
71CHEVYSHORTBED402
Senior Member
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,324
Re: Need Advice on truck value

The bed itself looks like a short bed. Doesn't mean it's a SWB truck. That can only be verified by inspection. The SPID is a guide, but it may not be original.

Rust on the doors may mean rust in the cab.


If rust is negligible, assuming the power train, suspension and brakes are tight, and considering the mods and 305, perhaps

SWB: $6-8ish
Modified LWB: $2500-5ish
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote
Old 01-18-2017, 06:27 PM   #13
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,482
Re: Need Advice on truck value

Look at the rear springs, cut collapsed, does not look correct. Too many questionable parts, 67-68 front end?
notsolo is offline   Reply With Quote
Old 01-18-2017, 07:24 PM   #14
cypressbog
Go Pack Go!
 
Join Date: Nov 2005
Location: Green Bay
Posts: 2,669
Re: Need Advice on truck value

I'd pay $4,000-$5,000 MAX. You buy the truck and would have to restore the whole thing. I get the feeling someone quickly spray bombed it for quick sale.

Cut dash radio hole.
Cut inner door speakers.
Inner bottom of doors rusting.
Re-used rusty hardware.
Rear pan dinged up.
Tail light chrome bent up.
Body seams off.
Mis-matched foot pedal pads.
Dash bezel hacked up.
Seat has nicks and cuts.
Glued-in headliner.
Inner tailgate and inside bed beat to hell.
fuel filler in middle of the bed.
Orange peel paint.
Rear coil springs compromized.
cypressbog is offline   Reply With Quote
Old 01-19-2017, 02:05 PM   #15
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Need Advice on truck value

You can see the rust in the door bottoms...

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 01-19-2017, 03:19 PM   #16
D.L.
Registered User
 
Join Date: Sep 2016
Location: Montgomery, TX.
Posts: 17
Re: Need Advice on truck value

Thanks guys. You noticed a lot more than I did and that's why I asked. The search continues....
D.L. is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com