WTB: Good cheap engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 10-15-2003, 12:16 AM

Anything will do as long as it will bolt right into my 85 K10, I figure I could find a good cheap 305 from somebody who pulled it for a bigger engine, I want something really cheap but something that could only need maybe valve seals or something, want something temporary for my 350 until I can rebuild it or until I build my 406, need something to just last till spring or summer. And also fairly close to where i'm loacted which is in Lewisville NC zip 27012.

Forgot to mention I can use the heads off my 350 on the engine as long as they will work fine, obviously won't work for a 305 though, I assume they would work fine on anything else except a 305 long as the 1.94 intake and 1.5 valves will clear the cylinders.

ronsk10 · 10-15-2003, 12:54 AM

pm sent

10-15-2003, 12:16 AM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	WTB: Good cheap engine Anything will do as long as it will bolt right into my 85 K10, I figure I could find a good cheap 305 from somebody who pulled it for a bigger engine, I want something really cheap but something that could only need maybe valve seals or something, want something temporary for my 350 until I can rebuild it or until I build my 406, need something to just last till spring or summer. And also fairly close to where i'm loacted which is in Lewisville NC zip 27012. Forgot to mention I can use the heads off my 350 on the engine as long as they will work fine, obviously won't work for a 305 though, I assume they would work fine on anything else except a 305 long as the 1.94 intake and 1.5 valves will clear the cylinders. Last edited by Destructo; 10-15-2003 at 12:29 AM.

10-15-2003, 12:54 AM	#2
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.