Flywheel help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chris j · 01-29-2017, 09:46 PM

I'm in the process of upgrading to a B/W T5 five speed in my 50 GMC with a 238, I need to replace the 4 bolt flywheel, anyone know where I can find a good one? Appreciate any help I can get as mine is shot.
Thanks

**mr48chev** · 01-29-2017, 09:50 PM

What's shot on yours? Surface or ring gear?

chris j · 01-29-2017, 10:05 PM

The surface, I had a machine shop look at it, said its to thin. The springs on the clutch disk have worn off a good portion of the bolts holding the flywheel to the crank.

**mr48chev** · 01-30-2017, 01:13 AM

Ok, that calls for a replacement then. There are a few guys on here who sell parts that may have one or a line on one.

chris j · 01-30-2017, 01:19 AM

I am having a hard time finding one, if you know of someone who has one can you send me there contact info in a PM so I can contact them?
Thanks for your help

dwcsr · 01-30-2017, 10:15 AM

There is one on e ebay now. JJ Inlines is a GMC engine parts resource. You either have a 228 or a 248. Not 238

http://www.jjinlines.com/

chris j · 01-30-2017, 12:01 PM

Quote:

Originally Posted by dwcsr

There is one on e ebay now. JJ Inlines is a GMC engine parts resource. You either have a 228 or a 248. Not 238

http://www.jjinlines.com/

You are correct it is a 228 it was a long day yesterday,

Thanks for the help!

01-29-2017, 09:46 PM	#1
chris j Registered User Join Date: Dec 2013 Location: Pasco WA Posts: 20	Flywheel help I'm in the process of upgrading to a B/W T5 five speed in my 50 GMC with a 238, I need to replace the 4 bolt flywheel, anyone know where I can find a good one? Appreciate any help I can get as mine is shot. Thanks __________________ 1950 GMC 1968 Olds 442

01-29-2017, 09:50 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,710	Re: Flywheel help What's shot on yours? Surface or ring gear? __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-29-2017, 10:05 PM	#3
chris j Registered User Join Date: Dec 2013 Location: Pasco WA Posts: 20	Re: Flywheel help The surface, I had a machine shop look at it, said its to thin. The springs on the clutch disk have worn off a good portion of the bolts holding the flywheel to the crank. __________________ 1950 GMC 1968 Olds 442

01-30-2017, 01:13 AM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,710	Re: Flywheel help Ok, that calls for a replacement then. There are a few guys on here who sell parts that may have one or a line on one. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-30-2017, 01:19 AM	#5
chris j Registered User Join Date: Dec 2013 Location: Pasco WA Posts: 20	Re: Flywheel help I am having a hard time finding one, if you know of someone who has one can you send me there contact info in a PM so I can contact them? Thanks for your help __________________ 1950 GMC 1968 Olds 442

01-30-2017, 10:15 AM	#6
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Flywheel help There is one on e ebay now. JJ Inlines is a GMC engine parts resource. You either have a 228 or a 248. Not 238 http://www.jjinlines.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.