02-13-2017, 02:27 PM | #1 |
Registered User
Join Date: Dec 2011
Location: Boise, Idaho
Posts: 586
|
heat, vent, defrost
Hello All,
I searched and read a few post about the heat/ac not switching from defrost to floor or vent. Most post say the diaphragm that actuates the damper door has failed. I am not getting vacuum to the diaphragm. i have vacuum under the hood to where is goes through the firewall. is there another point of failure i should consider before i tear my dash apart? Does the main control in the dash sometimes fail or become clogged? When i switch from heat to defrost i can here one of the diaphragms move but i still get 90% of the air out of the vents. Additional note, I feel i have a leak somewhere because now if i am going downhill with my foot off the gas the engine will surge. Thanks, Chris |
Bookmarks |
|
|