TH350 to LS 6.0. where does the kick down cable and vacuum hook to? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suburban99 · 03-19-2017, 03:25 PM

Swapping a LS 6.0 into my 72 K10. Is there a bracket for hooking the TH350 kick down cable up to the throttle? Where should I hook the vacuum for Tranny to? (drive by cable motor). Thanks

aruss99 · 03-20-2017, 12:46 PM

I had a th400, so I can only answer the vacuum question, but I used the brake booster line off the back of the intake for vacuum. Works just fine.

**First c10** · 03-20-2017, 05:30 PM

The kickdown cable....Your probably going to have to connect it to the throttle cable somewhere

Jstock85 · 03-24-2017, 01:54 PM

Quote:

Originally Posted by aruss99

I had a th400, so I can only answer the vacuum question, but I used the brake booster line off the back of the intake for vacuum. Works just fine.

could you explain that please? I have a th350 and will doing the same thing. Did you take the hose from the brake booster, connect to it somehow, or is there another hose you are referring to?

aruss99 · 03-24-2017, 03:14 PM

Quote:

Originally Posted by Jstock85

could you explain that please? I have a th350 and will doing the same thing. Did you take the hose from the brake booster, connect to it somehow, or is there another hose you are referring to?

My truck doesn't have power brakes, so I used the line on the back of the intake manifold, (approximately 1/2inch in diameter) that attached to the hose running to the original brake booster on the donor truck. I attached a fitting to the rubber hose with hose clamps to get the hose size down to 1/4 inch. Then I used regular vacuum line to to run to the transmission.

Hopefully this helps, if not, feel free to ask again for more clarification

Jstock85 · 05-10-2017, 09:33 AM

Quote:

Originally Posted by suburban99

Swapping a LS 6.0 into my 72 K10. Is there a bracket for hooking the TH350 kick down cable up to the throttle? Where should I hook the vacuum for Tranny to? (drive by cable motor). Thanks

What did you end up doing to hook up that kick down cable?

suburban99 · 05-10-2017, 10:00 AM

Quote:

Originally Posted by Jstock85

What did you end up doing to hook up that kick down cable?

I haven't hooked up the cable yet...but I have read you can use a longer one and connect it to the throttle..will post when I do figure it out.

Jstock85 · 05-10-2017, 10:05 AM

Quote:

Originally Posted by suburban99

I haven't hooked up the cable yet...but I have read you can use a longer one and connect it to the throttle..will post when I do figure it out.

Please do! I'm a few steps behind you and will be getting to that soon. Thanks!

PunishedC10 · 05-10-2017, 10:31 AM

I ran the vaccum hose from the ls1 intake to my brake booster. My hose still had the same connection on the brake booster end that popped right into the booster. I have a trailblazer ss/07+intake here that has the same hose on it as well. The 99-06 truck vacuum hose should also work this same way.
Maybe you could T into this one for the trans

Jstock85 · 05-10-2017, 10:44 AM

Quote:

Originally Posted by PunishedC10

I ran the vaccum hose from the ls1 intake to my brake booster. My hose still had the same connection on the brake booster end that popped right into the booster. I have a trailblazer ss/07+intake here that has the same hose on it as well. The 99-06 truck vacuum hose should also work this same way.
Maybe you could T into this one for the trans

You took the hose from top middle of manifold and ran to brake booster?

PunishedC10 · 05-10-2017, 06:45 PM

Quote:

Originally Posted by Jstock85

You took the hose from top middle of manifold and ran to brake booster?

Yes, it had the connection that pop into the brake booster still on the end so it was easy haha
Posted via Mobile Device

Jstock85 · 05-16-2017, 01:00 PM

Punished, you figure out what you going to do to connect the kick down cable?

PunishedC10 · 05-16-2017, 09:29 PM

I am running a 4l80e, I don't have to worry about it haha

Jstock85 · 05-17-2017, 09:15 AM

Got it. Thanks anyway!

03-19-2017, 03:25 PM	#1
suburban99 Registered User Join Date: May 2014 Location: Mission BC Posts: 452	TH350 to LS 6.0. where does the kick down cable and vacuum hook to? Swapping a LS 6.0 into my 72 K10. Is there a bracket for hooking the TH350 kick down cable up to the throttle? Where should I hook the vacuum for Tranny to? (drive by cable motor). Thanks __________________ 1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped

03-20-2017, 12:46 PM	#2
aruss99 Registered User Join Date: Feb 2015 Location: Phoenix Arizona Posts: 122	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? I had a th400, so I can only answer the vacuum question, but I used the brake booster line off the back of the intake for vacuum. Works just fine.

03-20-2017, 05:30 PM	#3
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? The kickdown cable....Your probably going to have to connect it to the throttle cable somewhere __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

05-10-2017, 10:31 AM	#9
PunishedC10 Registered User Join Date: Mar 2015 Location: Midland Texas Posts: 175	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? I ran the vaccum hose from the ls1 intake to my brake booster. My hose still had the same connection on the brake booster end that popped right into the booster. I have a trailblazer ss/07+intake here that has the same hose on it as well. The 99-06 truck vacuum hose should also work this same way. Maybe you could T into this one for the trans __________________ 1964 Coupe Deville(cruiser) 1966 Chevy II Nova 2door Hardtop 1985 C10 LS1/4l80e, Ridetech coilovers,22”Coys 2019 F-250 Platinum-Deleted/Carli Supension 37” MT’s 2000 Trans Am WS6, LS1/T-56, too many mods to list

05-16-2017, 01:00 PM	#12
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? Punished, you figure out what you going to do to connect the kick down cable?

05-16-2017, 09:29 PM	#13
PunishedC10 Registered User Join Date: Mar 2015 Location: Midland Texas Posts: 175	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? I am running a 4l80e, I don't have to worry about it haha __________________ 1964 Coupe Deville(cruiser) 1966 Chevy II Nova 2door Hardtop 1985 C10 LS1/4l80e, Ridetech coilovers,22”Coys 2019 F-250 Platinum-Deleted/Carli Supension 37” MT’s 2000 Trans Am WS6, LS1/T-56, too many mods to list

05-17-2017, 09:15 AM	#14
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: TH350 to LS 6.0. where does the kick down cable and vacuum hook to? Got it. Thanks anyway!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.