The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-27-2017, 11:58 PM   #1
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
ok another answer the the eternal wiper arm thread :D

Ok guys been doing some research in my off time and found an alternative that requires a lil work but according to guys that are using this mod it works fantasticly!!!! Jeep Cherokee 84-95 rear wiper arms use a 1/2 inch knurled post parts number 42873 at oreillys double check me on it since my truck is far away from this yet. But two friends arm using them after mods and quite happy with the results
next:
steps one by one to make the mod
the wiper "rod" on one arm needs turned 180 degrees to match the stock on
pictures to follow of the steps
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 12:00 AM   #2
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

first step two wiper arms I got junkyard ones for my initial experiments but aftermarket has them available readily since the jeeps are popular
Attached Images
 
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 12:01 AM   #3
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

second step drill out the rivet on the arm you are to modify for the swap. You can see where I flattened out the spring mount curve with a hammer it needs to be rebent the other direction when the arm is turned
Attached Images
  
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 12:05 AM   #4
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

ok next step remount the arm 180 degrees in the frame and use a 4-40 bolt to secure it in place
Attached Images
  
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 12:06 AM   #5
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

4-40 bolt secured at ace hardware
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 12:08 AM   #6
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

finished mount and grab a new off the shelf set of wiper arms 13 inch arms work but these are shorter so you may be able to use 14 inch blades as well... Going to do this for my truck when I get it there and post blade parts numbers for yall
Attached Images
 
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 06:49 AM   #7
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: ok another answer the the eternal wiper arm thread :D

Often wondered about the rear wiper arms. Thanks for the post as I will need to do something soon my drivers side is loosing its spring tension.
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 04-28-2017, 11:53 AM   #8
racecougar
Registered User
 
racecougar's Avatar
 
Join Date: Jan 2013
Location: Imperial, MO
Posts: 1,003
Re: ok another answer the the eternal wiper arm thread :D

Thanks for posting this here, Sean. Great write up!
__________________
Rod @ AzzKicker Cars
1965 C10 SWB - Build Thread
racecougar is offline   Reply With Quote
Old 04-28-2017, 08:24 PM   #9
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

Here is a picture with them installed on a friends truck hope yall enjoy he said he grabbed a set of thirteen inch blades from baxter autoparts lol

Sean
Attached Images
 
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 09:26 PM   #10
Brad54
Registered User
 
Brad54's Avatar
 
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
Re: ok another answer the the eternal wiper arm thread :D

Wow... that's gonna work AWESOME on my K10 build!!!
Thanks!

-Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck!
'62 K-10 long-step project
'61 C30 Camper, aka "Valdez"

There's no cool like Old School
Brad54 is offline   Reply With Quote
Old 04-28-2017, 09:42 PM   #11
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

Brad54
All in love for my truck share ideas makes this forum tge best out there ��

Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 10:02 PM   #12
Mathew21
Registered User
 
Mathew21's Avatar
 
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,192
Re: ok another answer the the eternal wiper arm thread :D

Nice write up, Thanks for sharing.
__________________
It only has original paint once
Mathew21 is offline   Reply With Quote
Old 04-28-2017, 10:10 PM   #13
DPowers
One foot in front of the other
 
DPowers's Avatar
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
Re: ok another answer the the eternal wiper arm thread :D

FAQ section maybe?
DPowers is offline   Reply With Quote
Old 04-28-2017, 10:50 PM   #14
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

Dpowers that would be great but ya know if it gets out there and used is all i care about
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 11:25 PM   #15
Aaronoregon
Registered User
 
Join Date: May 2013
Location: Bend, Oregon
Posts: 75
Re: ok another answer the the eternal wiper arm thread :D

That truck looks familiar!
Aaronoregon is offline   Reply With Quote
Old 04-28-2017, 11:29 PM   #16
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: ok another answer the the eternal wiper arm thread :D

Thanks for posting this Sean

Are the blades your friend used the blades for the Cherokee?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 04-28-2017, 11:37 PM   #17
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

Captainfab
Not sure they are 13 inch blades i believe 14 blades will work also will post more wgen i get mine built i have tge arms coming in this week coming. Will ask Aaron which length blades he used as well
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-28-2017, 11:50 PM   #18
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

13 inch Cherokee blade for rear window is what my friend Aaron used
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-29-2017, 12:10 AM   #19
Aaronoregon
Registered User
 
Join Date: May 2013
Location: Bend, Oregon
Posts: 75
Re: ok another answer the the eternal wiper arm thread :D

It's my truck. 14" should work just fine. Really good upgrade to bring it to modern day reliable wipers that can be replaced every year easily now.
Aaronoregon is offline   Reply With Quote
Old 04-29-2017, 12:18 AM   #20
sdwolff98
Turning Wrenches Daily
 
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,129
Re: ok another answer the the eternal wiper arm thread :D

Hey Aaron
Awesome good to know my friend in dallas i believe used 14 inch blades
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!!

1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342
2016 Ram Big Horn 4WD parts hauler
2010 Chevy HHR wife new car after the circled problem blew up!!!
1981 Ram D150 /6 auto Wife's sunday driver

Living outside Gladewater Texas now working in Longview at the hospital there

future project toys:
1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867
sdwolff98 is offline   Reply With Quote
Old 04-29-2017, 10:01 AM   #21
cp_66_c20
Registered User
 
cp_66_c20's Avatar
 
Join Date: Nov 2011
Location: indianapolis in
Posts: 26
Re: ok another answer the the eternal wiper arm thread :D

Thank you sdwolff98 for making this write up. I was looking all over for this exact upgrade/build. That makes everything easier for finding wiper blades and reliability. If you guys could make it a sticky I am sure other people would love it too.
cp_66_c20 is offline   Reply With Quote
Old 04-29-2017, 10:39 AM   #22
Chevystep
Registered User
 
Join Date: Jan 2014
Location: Comfort, TX
Posts: 142
Re: ok another answer the the eternal wiper arm thread :D

Quote:
Originally Posted by sdwolff98 View Post
Here is a picture with them installed on a friends truck hope yall enjoy he said he grabbed a set of thirteen inch blades from baxter autoparts lol

Sean
Soooo, you only have to turn one of 'em around...cool deal, best forum around!
Chevystep is offline   Reply With Quote
Old 05-26-2017, 03:15 PM   #23
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,223
Re: ok another answer the the eternal wiper arm thread :D

Thank you for the tip. I just did this on my 64 today and love it. It works really well to me on mine since I do not have any stainless windshield trim/moldings. The black just fits right in.

Thanks again man.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 05-26-2017, 04:59 PM   #24
darkhorse970
Registered User
 
darkhorse970's Avatar
 
Join Date: May 2009
Location: Monroe, LA
Posts: 2,104
Re: ok another answer the the eternal wiper arm thread :D

Great idea and write up!
__________________
Keith

SOLD - 1963 C10 Short Fleet
350/700R4
4/6 drop

1967 GMC Super Custom - Short Fleet
COPO concept w/427 BBC
T-400 w/Doug Nash overdrive
4/6 Drop, Buddy Buckets, etc...
Frame Off (In Progress)
I call it "Vulgar Display of Power"

1980 Silverado
Original paint
49k Original miles
4/6 drop


Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941
darkhorse970 is offline   Reply With Quote
Old 06-01-2017, 04:29 PM   #25
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: ok another answer the the eternal wiper arm thread :D

I went to the local pick a part yard last Friday because of this thread. I was able to find 2 Cherokee's that still had the rear wipers on them. $10 later I have a set to start with. Once I get some shop time, I will update my thread with my version of this swap.

Thanks for the information. I was not sure what I was going to do for wipers on my truck. Mine have been MIA for over a decade...
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com