04-29-2017, 10:44 AM | #1 |
Registered User
Join Date: Feb 2011
Location: OH.44202
Posts: 213
|
Buzzer wire plug
Hi there
Any idea please where I could find the buzzer plug connecter such as the below picture |
05-07-2017, 05:38 PM | #2 |
Registered User
Join Date: Feb 2011
Location: OH.44202
Posts: 213
|
Re: Buzzer wire plug
Up
|
05-07-2017, 06:18 PM | #3 |
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
|
Re: Buzzer wire plug
Near the fuse box under dash
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
05-08-2017, 04:24 PM | #4 |
Registered User
Join Date: Feb 2011
Location: OH.44202
Posts: 213
|
Re: Buzzer wire plug
The one I have is damaged.. I am looking for new plug such as this one
|
05-29-2017, 09:21 PM | #5 |
Registered User
Join Date: Feb 2011
Location: OH.44202
Posts: 213
|
Re: Buzzer wire plug
up
|
05-29-2017, 10:48 PM | #6 |
Registered User
Join Date: May 2017
Location: USA
Posts: 52
|
Re: Buzzer wire plug
Omar, is that buzzer for seat belts? If so, do you really want a belt buzzer?
|
06-11-2017, 09:38 PM | #7 |
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 766
|
Re: Buzzer wire plug
On 84 and up scrap yard (recycle yard) try Grote (Grote Industries, Inc. auto wiring connectors ).
At any of your local good auto part store that sell Grote connectors
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
Bookmarks |
|
|