Camaro oil pan help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 05-26-2017, 04:00 PM

Ok a lil delima here. The cover that goes inside the oil pan. Do i need to replace it with camaro one or can i use the one on the truck motor?
If i need to replace it with the camaro one though the back 2 bolts do not line up and ill have to drill new holes in the cover
Motor is a 5.3 from a yukon 2004

**michael bustamante** · 05-26-2017, 05:40 PM

Also.is there a trick to mounting the gasket? Those alignment pegs are messin me up!

crakarjax · 05-26-2017, 05:49 PM

I used a camaro pan with camaro windage tray (like $25 shipped on ebay fyi) and had no issues with bolts lining up. You could also modify the truck windage tray, it's a pretty simple piece after all.

Not sure what you're referring to with aligning the gasket, as the bolts should line it up pretty easily. I did not have any alignment pegs on mine afaict.

Now that I think about it, I think you might have the wrong pan... the back bolts definitely line up on my 2004 ecalade engine to the f-body pan.

**michael bustamante** · 05-26-2017, 07:43 PM

Yup they did. I just didnt mock it up back far enough. Lol
Another question. I cannot remember for the life of me what hooked up to this.

homemade87 · 05-27-2017, 07:43 AM

Quote:

Originally Posted by michael bustamante

Yup they did. I just didnt mock it up back far enough. Lol
Another question. I cannot remember for the life of me what hooked up to this.

There most likely was nothing hooked up to that piece unless it was drilled and threaded . I drilled mine out and put my oil sending unit in it for my gauge .

Jstock85 · 05-27-2017, 10:11 AM

Im currently working on a 4.8 and nothing was connected there on mine. i think its there to give you options similar to what homemade 87 did with his.

**michael bustamante** · 05-27-2017, 04:07 PM

cool. im tapping it today then

Big Port Jimmy 6 · 05-27-2017, 10:17 PM

The tapped ones are for oil temp senders, corvette only I think.

akdg87 · 05-30-2017, 02:16 PM

Quote:

Originally Posted by michael bustamante

Ok a lil delima here. The cover that goes inside the oil pan. Do i need to replace it with camaro one or can i use the one on the truck motor?
If i need to replace it with the camaro one though the back 2 bolts do not line up and ill have to drill new holes in the cover
Motor is a 5.3 from a yukon 2004

You can cut the truck windsge tray to work with the ls1 oil pan. I did it and it works plenty fine. Just google it.

**Hart_Rod** · 06-01-2017, 10:34 AM

Quote:

Originally Posted by michael bustamante

cool. im tapping it today then

Make sure you drill it out also...

68Stepbed · 06-01-2017, 11:27 AM

Use the correct windage tray and pickup tube with the corresponding oil pan. They're different for a reason.

05-26-2017, 04:00 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Camaro oil pan help Ok a lil delima here. The cover that goes inside the oil pan. Do i need to replace it with camaro one or can i use the one on the truck motor? If i need to replace it with the camaro one though the back 2 bolts do not line up and ill have to drill new holes in the cover Motor is a 5.3 from a yukon 2004 Attached Images __________________ 1967custom

05-26-2017, 05:40 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Camaro oil pan help Also.is there a trick to mounting the gasket? Those alignment pegs are messin me up! __________________ 1967custom

05-26-2017, 05:49 PM	#3
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Camaro oil pan help I used a camaro pan with camaro windage tray (like $25 shipped on ebay fyi) and had no issues with bolts lining up. You could also modify the truck windage tray, it's a pretty simple piece after all. Not sure what you're referring to with aligning the gasket, as the bolts should line it up pretty easily. I did not have any alignment pegs on mine afaict. Now that I think about it, I think you might have the wrong pan... the back bolts definitely line up on my 2004 ecalade engine to the f-body pan. __________________ 1968 LWB C20 / AC / Wood Bed

05-26-2017, 07:43 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Camaro oil pan help Yup they did. I just didnt mock it up back far enough. Lol Another question. I cannot remember for the life of me what hooked up to this. Attached Images __________________ 1967custom

05-27-2017, 10:11 AM	#6
Jstock85 Registered User Join Date: Jul 2016 Location: Brandon,MS Posts: 489	Re: Camaro oil pan help Im currently working on a 4.8 and nothing was connected there on mine. i think its there to give you options similar to what homemade 87 did with his.

05-27-2017, 04:07 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Camaro oil pan help cool. im tapping it today then __________________ 1967custom

05-27-2017, 10:17 PM	#8
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: Camaro oil pan help The tapped ones are for oil temp senders, corvette only I think. __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

06-01-2017, 11:27 AM	#11
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Camaro oil pan help Use the correct windage tray and pickup tube with the corresponding oil pan. They're different for a reason. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.