|
|
|
06-09-2017, 03:49 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: lynden wa
Posts: 469
|
60-62
just picked up a 62 torrision bar it has a V-8 does anyone got a picture of a in line 6 engine frame mount .. I am doing ass backward swap a 6 for a eight ,,thx for your time hop ..oh anybody have a set of inline 6 frame mounts out there thx Hop
__________________
Save a tree support your local drag strip !!! |
|
|
|
06-09-2017, 04:18 PM
|
#2 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 60-62
Does it still have the Bellhousing mounts? Also depends what six you're putting in. If it's a 216/235/261 then you will need a front mount that attaches to the front of the crossmember. If you are putting in a later 230/250/292 then you will need side mounts. The 230/250 uses the same perches as a 1963 and up v8, as where the 292 needs a different passengers side perch.
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
|
06-09-2017, 08:21 PM
|
#3 | |
|
Registered User
Join Date: Nov 2010
Location: lynden wa
Posts: 469
|
Re: 60-62
Quote:
__________________
Save a tree support your local drag strip !!! |
|
|
|
|
|
06-10-2017, 03:02 AM
|
#4 |
|
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: 60-62
Does your current v8 have side mounts? If so then the 70' 250 will bolt right up.
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
