Should I give out info???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 10-25-2003, 10:05 PM

Simple question:
As you know I have been preparing for a tank conversion (underbed) and Tennman fuel fill. I fainally got all parts and will be hopefully completeing it Sunday and Monday. I will give a how to with picks after I'm done. My question is: I found a really good deal on new tanks complete. I would like to give the info out on this sight, but I don't want to upset the vendors. I don't want to sell the tanks, just give out info on where to get them for good price. If the overwhelming majority thinks I shouldn't tell, then I won't. AT ALL. That includes PMs. I respect everyone on this board including the vendors (They have been very helpful to everyone). I will decide after viewing the poll on Monday Night. Vendors feel free to post also!!
Shawn

dinnut · 10-25-2003, 10:10 PM

whats the problem with telling? dont the vendors want to sell them?

jorgensensc · 10-25-2003, 10:12 PM

The place I found them is cheaper than most vendors on this sight, but is a reputable company!! I don't want to cause hate and discontent.

Tx Firefighter · 10-25-2003, 10:20 PM

This is the United States of America...home of free enterprise.

Does anybody remember a few years ago when instrument bezels were 100 and dash pads were 140?

Price competition is good.

Bring it on buddy, save me some money!

jorgensensc · 10-25-2003, 10:43 PM

TTT Please

griesel72 · 10-25-2003, 10:54 PM

Pass it on, At the very least it will keep our great vendors on this site Honest

A.P. · 10-25-2003, 11:02 PM

jorgensensc
Save me some money.

A.P.

jorgensensc · 10-25-2003, 11:17 PM

I have to tell you, I expected to hear from the vendors by now. Maybe they are all off right now

krue · 10-25-2003, 11:18 PM

I believe the vendors on this board can take it. So far it's unanimous. So fess up, what's the big deal, so to speak?

68 Suburban · 10-25-2003, 11:23 PM

This site is for us, not the vendors.

jorgensensc · 10-25-2003, 11:24 PM

Nice try Krue, but not yet

krue · 10-25-2003, 11:26 PM

Can't blame me for trying!

truckster · 10-25-2003, 11:27 PM

I don't think it would be in the best interest of the vendors to try to keep any info off this board. People would stop using it if they thought it was being manipulated.

jorgensensc · 10-25-2003, 11:28 PM

Good point 68 Suburban!!!! But to be fair, the vendors have run special deals for us, and I would hate to loose their knowledge base without at least a democratic vote. After all, that is what this country is all about, right Tx Firefighter!!!

**smitty62** · 10-25-2003, 11:32 PM

I feel Truckster has a valid point. I wouldn't use a vendor that complained. This is an enthusiast forum, not a vendor site.
BTW--I paid $200 for my Blazer gas tank delivered.

jorgensensc · 10-25-2003, 11:35 PM

Truckster also has a great point!!!!!! The views are really interesting and well thought out. I love GOOD conversation!!

Alexis · 10-25-2003, 11:39 PM

I doudt you'll run any of the board vendors out of business. plus i would think this board has brought plenty of good busniess towards the vendors that hang with us around here.

krue · 10-25-2003, 11:42 PM

You sure you don't just like playing "I got a secret"?J/K

Seriously though, most of us that do business with the vendors on this board do so because of many reasons, not just bottom line. Service, parts quality, the ability to communicate with them are some other things that people take into account. I don't think getting underpriced on one item is going to put them out of business.

jorgensensc · 10-25-2003, 11:48 PM

Naw, I'm not playing the secret game, I promise. I tell you what, somebody get vendor on the thread to tell me it's cool and I will release the info. That is the only way, unless we wait till Monday night. Like I said, just trying to be fair.

c10crazy · 10-26-2003, 12:01 AM

I thought summit had em'

jorgensensc · 10-26-2003, 12:05 AM

They do I think. The deal is that I have seen broad ranges for these tanks. Even used tanks fetch a pretty penny.

jorgensensc · 10-26-2003, 12:45 AM

215 views, 32 votes?????

Mudder · 10-26-2003, 12:51 AM

I got my 86 Blazer tank, skid plate, crossmembers and fill tube for 60 bucks and they took it all off for me.

jorgensensc · 10-26-2003, 12:57 AM

I didn't know th '86 blazer tanks worked in our trucks. I assume that was used?

Mudder · 10-26-2003, 01:02 AM

Sure it was from a salvage yard but in nice shape. Not sure what teh measurements are on the frames but mines a 77 chassis. I do have the larger tank too. They had 2 different sizes.

View Poll Results: Do I give out Tank Information???
Yes, give info	66	100.00%
No, don't tell	0	0%
Voters: 66. You may not vote on this poll

10-25-2003, 10:05 PM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Should I give out info???? Simple question: As you know I have been preparing for a tank conversion (underbed) and Tennman fuel fill. I fainally got all parts and will be hopefully completeing it Sunday and Monday. I will give a how to with picks after I'm done. My question is: I found a really good deal on new tanks complete. I would like to give the info out on this sight, but I don't want to upset the vendors. I don't want to sell the tanks, just give out info on where to get them for good price. If the overwhelming majority thinks I shouldn't tell, then I won't. AT ALL. That includes PMs. I respect everyone on this board including the vendors (They have been very helpful to everyone). I will decide after viewing the poll on Monday Night. Vendors feel free to post also!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 10:10 PM	#2
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	whats the problem with telling? dont the vendors want to sell them? __________________ 70 longbed 496/th400/Ford 9"

10-25-2003, 10:12 PM	#3
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	The place I found them is cheaper than most vendors on this sight, but is a reputable company!! I don't want to cause hate and discontent. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 10:20 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	This is the United States of America...home of free enterprise. Does anybody remember a few years ago when instrument bezels were 100 and dash pads were 140? Price competition is good. Bring it on buddy, save me some money! __________________ I'm on the Instagram- @Gearhead_Kevin

10-25-2003, 10:43 PM	#5
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	TTT Please __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 10:54 PM	#6
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Pass it on, At the very least it will keep our great vendors on this site Honest __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

10-25-2003, 11:02 PM	#7
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	jorgensensc Save me some money. A.P. __________________ 72 Chevy, SWB, 350engine, TH400

10-25-2003, 11:17 PM	#8
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	I have to tell you, I expected to hear from the vendors by now. Maybe they are all off right now __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 11:18 PM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I believe the vendors on this board can take it. So far it's unanimous. So fess up, what's the big deal, so to speak? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-25-2003, 11:23 PM	#10
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	This site is for us, not the vendors. __________________ Just sitting here contemplating contemplation.

10-25-2003, 11:24 PM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Nice try Krue, but not yet __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 11:26 PM	#12
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Can't blame me for trying! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-25-2003, 11:27 PM	#13
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 8,021	I don't think it would be in the best interest of the vendors to try to keep any info off this board. People would stop using it if they thought it was being manipulated. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

10-25-2003, 11:28 PM	#14
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Good point 68 Suburban!!!! But to be fair, the vendors have run special deals for us, and I would hate to loose their knowledge base without at least a democratic vote. After all, that is what this country is all about, right Tx Firefighter!!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

10-25-2003, 11:32 PM	#15
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	I feel Truckster has a valid point. I wouldn't use a vendor that complained. This is an enthusiast forum, not a vendor site. BTW--I paid $200 for my Blazer gas tank delivered. __________________ Stepsides look like real trucks! Smitty Last edited by smitty62; 10-25-2003 at 11:41 PM.

10-25-2003, 11:35 PM	#16
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Truckster also has a great point!!!!!! The views are really interesting and well thought out. I love GOOD conversation!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-25-2003, 11:39 PM	#17
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	I doudt you'll run any of the board vendors out of business. plus i would think this board has brought plenty of good busniess towards the vendors that hang with us around here.

10-25-2003, 11:42 PM	#18
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	You sure you don't just like playing "I got a secret"?J/K Seriously though, most of us that do business with the vendors on this board do so because of many reasons, not just bottom line. Service, parts quality, the ability to communicate with them are some other things that people take into account. I don't think getting underpriced on one item is going to put them out of business. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-25-2003, 11:48 PM	#19
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Naw, I'm not playing the secret game, I promise. I tell you what, somebody get vendor on the thread to tell me it's cool and I will release the info. That is the only way, unless we wait till Monday night. Like I said, just trying to be fair. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-26-2003, 12:01 AM	#20
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	I thought summit had em' __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

10-26-2003, 12:05 AM	#21
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	They do I think. The deal is that I have seen broad ranges for these tanks. Even used tanks fetch a pretty penny. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-26-2003, 12:45 AM	#22
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	215 views, 32 votes????? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-26-2003, 12:51 AM	#23
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I got my 86 Blazer tank, skid plate, crossmembers and fill tube for 60 bucks and they took it all off for me.

10-26-2003, 12:57 AM	#24
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	I didn't know th '86 blazer tanks worked in our trucks. I assume that was used? __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

Register or Log In To remove these advertisements.

10-26-2003, 01:02 AM	#25
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Sure it was from a salvage yard but in nice shape. Not sure what teh measurements are on the frames but mines a 77 chassis. I do have the larger tank too. They had 2 different sizes.