IA 1980 GM tach cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 08-27-2017, 04:44 PM

Well I had been on the hunt for a better cluster to restore than the one I had bought on here awhile back from a member and then I found 2 complete clusters in a trade with a local guy so....if anybody needs a nice one here ya go-it does have a broken LH tab but overall this is a very nice, bright cluster. $275 is my asking price plus shipping.

The HEI tach harness is also included with this too and itbis complete from tach to distributor. This will also fit 78-86 as a direct swap and will work in 73-77 with a few wiring modifications.

whytry85 · 08-27-2017, 10:42 PM

I assume it's in working condition and needs nothing to put in the truck?

*gmachinz* · 08-27-2017, 10:59 PM

Yes it is a working cluster....you will need to drill a 1" hole in the firewall to route the tach signal wire. On this particular tach harness the hole is located below thebfusepanel next to the climate control harness grommet as viewed from under the hood.

whytry85 · 08-28-2017, 02:01 PM

Pm sent

*gmachinz* · 08-28-2017, 05:50 PM

Sale pending to whytry....

*gmachinz* · 08-29-2017, 08:41 AM

*sold*

08-27-2017, 04:44 PM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	1980 GM tach cluster Well I had been on the hunt for a better cluster to restore than the one I had bought on here awhile back from a member and then I found 2 complete clusters in a trade with a local guy so....if anybody needs a nice one here ya go-it does have a broken LH tab but overall this is a very nice, bright cluster. $275 is my asking price plus shipping. The HEI tach harness is also included with this too and itbis complete from tach to distributor. This will also fit 78-86 as a direct swap and will work in 73-77 with a few wiring modifications. Attached Images

08-27-2017, 10:42 PM	#2
whytry85 Registered User Join Date: Aug 2005 Location: Henderson, Tx Posts: 211	Re: 1980 GM tach cluster I assume it's in working condition and needs nothing to put in the truck? __________________ Build thread:http://www.67-72chevytrucks.com/vboa...d.php?t=663953 Instagram: Whytry85

08-27-2017, 10:59 PM	#3
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 1980 GM tach cluster Yes it is a working cluster....you will need to drill a 1" hole in the firewall to route the tach signal wire. On this particular tach harness the hole is located below thebfusepanel next to the climate control harness grommet as viewed from under the hood.

08-28-2017, 02:01 PM	#4
whytry85 Registered User Join Date: Aug 2005 Location: Henderson, Tx Posts: 211	Re: 1980 GM tach cluster Pm sent __________________ Build thread:http://www.67-72chevytrucks.com/vboa...d.php?t=663953 Instagram: Whytry85

08-28-2017, 05:50 PM	#5
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 1980 GM tach cluster Sale pending to whytry....

08-29-2017, 08:41 AM	#6
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 1980 GM tach cluster sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.