NM WTB: one exhaust manifold bolt for SBC w AC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 09-09-2017, 01:07 AM

Chasing the exhaust manifold bolt for 350 SBC w AC - the most forward RH bolt as shown below. I believe it's double threaded and doubles to attach one of the AC compressor brackets. Mine was tossed by a PO when the headers went on. Thanks. Pete

toolboxchev · 09-09-2017, 02:59 AM

PM Sent...

**DeadheadNM** · 09-09-2017, 09:17 AM

Reply sent. Yep, it would resemble one of the bolts used for the water pump but the portion of bolt that runs through the AC bracket is longer at ~ 2 in total length.

toolboxchev · 09-09-2017, 04:08 PM

Measures 1 5/8 one side, exactly 2 inch other side total. Measured from bolt face opposing.

Not perfect but chased it with 3/8-16 die then ran a nut down both sides. Whatcha got for a trade.

I could really use a cast iron thermostat housing with little or (no rust) hopefully.

toolboxchev · 09-09-2017, 04:11 PM

Or a Power Steering Pump V-Belt pulley with no wobble. Let me know what ye have!

**DeadheadNM** · 09-09-2017, 11:13 PM

Thanks! I'll take it. Happy to trade - I know I have a good spare OEM t-stat housing from a SBC without that threaded insert but for some reason am thinking it's aluminum rather than iron. Does that sound right? I'll have to double check on the pulley - not sure if there's one attached to a spare pump I have boxed up.

toolboxchev · 09-09-2017, 11:53 PM

Deal.

09-09-2017, 01:07 AM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	WTB: one exhaust manifold bolt for SBC w AC Chasing the exhaust manifold bolt for 350 SBC w AC - the most forward RH bolt as shown below. I believe it's double threaded and doubles to attach one of the AC compressor brackets. Mine was tossed by a PO when the headers went on. Thanks. Pete Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-09-2017, 02:59 AM	#2
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: WTB: one exhaust manifold bolt for SBC w AC PM Sent...

09-09-2017, 09:17 AM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: WTB: one exhaust manifold bolt for SBC w AC Reply sent. Yep, it would resemble one of the bolts used for the water pump but the portion of bolt that runs through the AC bracket is longer at ~ 2 in total length. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-09-2017, 04:08 PM	#4
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: WTB: one exhaust manifold bolt for SBC w AC Measures 1 5/8 one side, exactly 2 inch other side total. Measured from bolt face opposing. Not perfect but chased it with 3/8-16 die then ran a nut down both sides. Whatcha got for a trade. I could really use a cast iron thermostat housing with little or (no rust) hopefully. Attached Images

09-09-2017, 04:11 PM	#5
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: WTB: one exhaust manifold bolt for SBC w AC Or a Power Steering Pump V-Belt pulley with no wobble. Let me know what ye have!

09-09-2017, 11:13 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,451	Re: WTB: one exhaust manifold bolt for SBC w AC Thanks! I'll take it. Happy to trade - I know I have a good spare OEM t-stat housing from a SBC without that threaded insert but for some reason am thinking it's aluminum rather than iron. Does that sound right? I'll have to double check on the pulley - not sure if there's one attached to a spare pump I have boxed up. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-09-2017, 11:53 PM	#7
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: WTB: one exhaust manifold bolt for SBC w AC Deal.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.