which torque converter? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 10-28-2003, 04:36 PM

saturday night special

or

super street fighter?

i was looking around on tci's website and need thelp deciding on a torque conveter for the th350c.

i want around a 3000rpm stall and those are the only 2 listed for my trans

low 84 · 10-28-2003, 05:18 PM

hughes (i have one) and torco are some other companies to look at

Tom · 10-28-2003, 06:44 PM

I've been to hughes [great guys there, I love hughes now] and I use TCI flexplates and both are great. Are you sure you want a 3k stall? I just swapped my 23-2400rpm convertor for a 2000rpm because I couldn't stand the high stall speed.

ocbaud · 10-28-2003, 07:07 PM

Quote:

Originally posted by Tom
I've been to hughes [great guys there, I love hughes now] and I use TCI flexplates and both are great. Are you sure you want a 3k stall? I just swapped my 23-2400rpm convertor for a 2000rpm because I couldn't stand the high stall speed.

i believe it will work best with the cam and gear i will have

*1FaastC10* · 10-28-2003, 07:24 PM

Eric, you CANNOT use a TH350 converter with a TH350C, the internal splines are different.

ocbaud · 10-28-2003, 07:30 PM

Quote:

Originally posted by 1FaastC10
Eric, you CANNOT use a TH350 converter with a TH350C, the internal splines are different.

i know.

the saturday night special and the super street fighter are the only 2 listed for a th350c

i'm asking which will be better?

*1FaastC10* · 10-28-2003, 09:14 PM

oh, must be a new thing. before i built the trans for my 82, i shopped for a 350C stall converter. seeing that there were none available i went with the TH350.

gldevall · 10-28-2003, 09:31 PM

Eric, what gears are you running or going to run? I running a Jeg's converter about 2000 stall.

ocbaud · 10-28-2003, 09:38 PM

gonna have a 274xe cam and will be running 3.73 gears

*1FaastC10* · 10-28-2003, 10:15 PM

i'd go with a Saturday night Special. i had one with the trans i mentioned earlier, and i loved it. not sure about the lockup unit, but it should be comparable.

ocbaud · 10-28-2003, 10:19 PM

Quote:

Originally posted by 1FaastC10
i'd go with a Saturday night Special. i had one with the trans i mentioned earlier, and i loved it. not sure about the lockup unit, but it should be comparable.

about how much total stall will that give me?

10-28-2003, 04:36 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	which torque converter? saturday night special or super street fighter? i was looking around on tci's website and need thelp deciding on a torque conveter for the th350c. i want around a 3000rpm stall and those are the only 2 listed for my trans

10-28-2003, 05:18 PM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	hughes (i have one) and torco are some other companies to look at __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-28-2003, 06:44 PM	#3
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,755	I've been to hughes [great guys there, I love hughes now] and I use TCI flexplates and both are great. Are you sure you want a 3k stall? I just swapped my 23-2400rpm convertor for a 2000rpm because I couldn't stand the high stall speed. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

10-28-2003, 09:31 PM	#8
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Eric, what gears are you running or going to run? I running a Jeg's converter about 2000 stall. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

10-28-2003, 07:24 PM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Eric, you CANNOT use a TH350 converter with a TH350C, the internal splines are different.

10-28-2003, 09:14 PM	#7
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	oh, must be a new thing. before i built the trans for my 82, i shopped for a 350C stall converter. seeing that there were none available i went with the TH350.

10-28-2003, 09:38 PM	#9
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	gonna have a 274xe cam and will be running 3.73 gears

10-28-2003, 10:15 PM	#10
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	i'd go with a Saturday night Special. i had one with the trans i mentioned earlier, and i loved it. not sure about the lockup unit, but it should be comparable.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.