Custom/Fabricated interior - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Harley Truck · 11-26-2017, 10:06 PM

Post your pics of interiors . I am starting on complete restoration of the inside of my 65 Burb and would like to see some ideas of what you guys have done. Looking to do something with door panels and inside panels below the windows on the inside. Thanks in advance...

Harley Truck · 11-26-2017, 10:11 PM

Here is a pic of my rear seat

63burban · 11-28-2017, 08:19 PM

Nice seat

wahl4m · 11-29-2017, 08:46 PM

is that a 3rd seat for a carryall ? looks nice -design & colors !!any of the others -getting done ? im kinda partial to the stock -grey or fawn interiors ?? thanks for pics !

Harley Truck · 11-30-2017, 04:42 PM

that is the long rear seat, I don't have the 3/4 seat to make 3 rows. The front seat will match design on the rear. installing new carpet and headliner next.

Harley Truck · 02-10-2018, 10:15 AM

pics added

Harley Truck · 02-10-2018, 10:18 AM

more pics

Harley Truck · 02-10-2018, 10:20 AM

torch red carpet and leather with hounds tooth inserts in the seats.

65chevysub · 02-11-2018, 07:34 PM

Up until about 4 years ago, I had my 65 fully carpeted: lower gate, wheelwells, door bottoms and kick panels, and of course floor front to back I had to cut the holes for the seat mounting plates but it looked good. I only have the back piece left. The front carpet got wet from a reclusive leak so had to throw it away. These are the only pics I have of the back carpet.

343CA · 02-22-2018, 01:14 PM

What are you using as a headliner? I am trying to come up with something to fill in between the support ribs along the inside roof structure. Trying to go for that smooth look. I would like to keep that same curve. Any advice would help.

Harley Truck · 02-22-2018, 02:27 PM

Upholstery guy used a fiber board of some type and used 1/2 in. Foam over it and then covered it with material. Secured in in place with glue and Velcro.

GMDad · 07-03-2018, 10:14 PM

Very nice interior and that looks like a rear A/C unit. Nice addition

Harley Truck · 07-12-2018, 09:20 PM

Thanks ! Yes front and rear A/C

AJCK87 · 12-05-2018, 01:15 PM

Hey Harley Truck,

I am curious about your rear heater unit. I have a 10 1/2 foot panel, and live on the wet coast, some additional heating/drying solutions would be awesome. Do you have a specific maker/ model number for your unit that you used. Info would be appreciated

Cheers,

Anthony

Harley Truck · 12-05-2018, 01:46 PM

That is a rear a/c unit. No hear

AJCK87 · 12-12-2018, 03:09 PM

Ok, thanks. That is pretty nice! Would be awesome if it did both

11-26-2017, 10:06 PM	#1
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Custom/Fabricated interior Post your pics of interiors . I am starting on complete restoration of the inside of my 65 Burb and would like to see some ideas of what you guys have done. Looking to do something with door panels and inside panels below the windows on the inside. Thanks in advance...

11-26-2017, 10:11 PM	#2
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior Here is a pic of my rear seat Attached Images

11-28-2017, 08:19 PM	#3
63burban Chevy addict Join Date: May 2012 Location: Iron Ridge, WI Posts: 1,085	Re: Custom/Fabricated interior Nice seat

11-29-2017, 08:46 PM	#4
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: Custom/Fabricated interior is that a 3rd seat for a carryall ? looks nice -design & colors !!any of the others -getting done ? im kinda partial to the stock -grey or fawn interiors ?? thanks for pics !

11-30-2017, 04:42 PM	#5
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior that is the long rear seat, I don't have the 3/4 seat to make 3 rows. The front seat will match design on the rear. installing new carpet and headliner next.

02-10-2018, 10:15 AM	#6
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior pics added Attached Images

02-10-2018, 10:18 AM	#7
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior more pics Attached Images

02-10-2018, 10:20 AM	#8
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior torch red carpet and leather with hounds tooth inserts in the seats.

02-11-2018, 07:34 PM	#9
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	Re: Custom/Fabricated interior Up until about 4 years ago, I had my 65 fully carpeted: lower gate, wheelwells, door bottoms and kick panels, and of course floor front to back I had to cut the holes for the seat mounting plates but it looked good. I only have the back piece left. The front carpet got wet from a reclusive leak so had to throw it away. These are the only pics I have of the back carpet. Attached Images

02-22-2018, 01:14 PM	#10
343CA Registered User Join Date: Sep 2013 Location: Imperial,Ca. Posts: 15	Re: Custom/Fabricated interior What are you using as a headliner? I am trying to come up with something to fill in between the support ribs along the inside roof structure. Trying to go for that smooth look. I would like to keep that same curve. Any advice would help.

02-22-2018, 02:27 PM	#11
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior Upholstery guy used a fiber board of some type and used 1/2 in. Foam over it and then covered it with material. Secured in in place with glue and Velcro.

07-03-2018, 10:14 PM	#12
GMDad Registered User Join Date: Aug 2008 Location: Caledonia Ont Posts: 137	Re: Custom/Fabricated interior Very nice interior and that looks like a rear A/C unit. Nice addition

07-12-2018, 09:20 PM	#13
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior Thanks ! Yes front and rear A/C

12-05-2018, 01:15 PM	#14
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: Custom/Fabricated interior Hey Harley Truck, I am curious about your rear heater unit. I have a 10 1/2 foot panel, and live on the wet coast, some additional heating/drying solutions would be awesome. Do you have a specific maker/ model number for your unit that you used. Info would be appreciated Cheers, Anthony

12-05-2018, 01:46 PM	#15
Harley Truck Registered User Join Date: Jun 2016 Location: Lufkin Texas Posts: 28	Re: Custom/Fabricated interior That is a rear a/c unit. No hear



Register or Log In To remove these advertisements.

12-12-2018, 03:09 PM	#16
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: Custom/Fabricated interior Ok, thanks. That is pretty nice! Would be awesome if it did both

Register or Log In To remove these advertisements.