TX WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 12-01-2017, 03:19 PM

I am in need of a set of four 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings. Photo of what I am looking for. Prices shipped to Leander Tx 78641, please.

**Jeff's bowtie's** · 12-01-2017, 07:02 PM

I think I have 4 of these I'll check when I get home and let you know

**Jeff's bowtie's** · 12-01-2017, 08:05 PM

$50.00 shipped for 4 rings

**WIDESIDE72** · 12-01-2017, 10:42 PM

Quote:

Originally Posted by Jeff's bowtie's

$50.00 shipped for 4 rings

I will take them. Pm me your payment info. On a related note. I recently bought a set of six 19.5 p30 wheels for my longhorn, and I overlooked the fact that the seller didn't include these rings. (Im pretty sure the p30 used these.) Just so happens that the seller happened to have four, but i felt he was asking an exorbitant amount for them. This, along witht the fact that wheels were supposed to have surface rust only, yet one has heavy scale on the dished side, hasnt left me too haply.

**Jeff's bowtie's** · 12-02-2017, 08:26 AM

Pm sent and yes the P/30 wheels require these rings here's a pic of my 78 K/30 with P/30 wheels

**Jeff's bowtie's** · 12-02-2017, 10:13 AM

Another one with these rings

**WIDESIDE72** · 12-02-2017, 04:01 PM

Payment sent

**WIDESIDE72** · 12-02-2017, 04:19 PM

Jeff, On a related note, can I get some input, if you have any? I will be installing (or at least attempting to install) these on a 70 c20 longorn. The bed is pretty rough and i have a utility bed off a dually (wider than the stock pickup bed). I bought a pair of dodge dually adapters for the front. They are 8x6.5 with 9/16" studs. I am going to see if they will work with the stock 1/2" studs on the current drums for the time being. I have a front crossmemner out of an 85 c20 that i plan to install eventually for the disc brakes.

I am wondering how things will go out back, as far as far as
mounting the wheels goes. I believe I have a dana 60. I am hoping the duals mount up with no issues. I wonder if i need some sort of spacer or adapter there. I am guessing it depends on my fenderwells on the utility bed (?) i have a rear axle out of a 71 or 72 c20 I plannto install for the 9/16" studs. Inbelieve that they are the same width though.

**Jeff's bowtie's** · 12-02-2017, 06:02 PM

I'm not sure but I think with going with the 19.5s they will clear but not 100% sure I always just use a 14 bolt out of the squarebody trucks or a Dana 70 like in my 68 K/30

Kmay55 · 01-12-2018, 05:56 PM

Will these work? https://www.anythingtruck.com/product/220-33521.html I only need 2. I figure it will be hard to find someone who just has 2 they want to sell.
Posted via Mobile Device

12-01-2017, 03:19 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings I am in need of a set of four 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings. Photo of what I am looking for. Prices shipped to Leander Tx 78641, please. Attached Images

12-01-2017, 07:02 PM	#2
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings I think I have 4 of these I'll check when I get home and let you know

12-01-2017, 08:05 PM	#3
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings $50.00 shipped for 4 rings Attached Images

12-02-2017, 08:26 AM	#5
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings Pm sent and yes the P/30 wheels require these rings here's a pic of my 78 K/30 with P/30 wheels Attached Images Last edited by Jeff's bowtie's; 12-02-2017 at 10:10 AM.

12-02-2017, 10:13 AM	#6
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings Another one with these rings Attached Images

12-02-2017, 04:01 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings Payment sent

12-02-2017, 04:19 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings Jeff, On a related note, can I get some input, if you have any? I will be installing (or at least attempting to install) these on a 70 c20 longorn. The bed is pretty rough and i have a utility bed off a dually (wider than the stock pickup bed). I bought a pair of dodge dually adapters for the front. They are 8x6.5 with 9/16" studs. I am going to see if they will work with the stock 1/2" studs on the current drums for the time being. I have a front crossmemner out of an 85 c20 that i plan to install eventually for the disc brakes. I am wondering how things will go out back, as far as far as mounting the wheels goes. I believe I have a dana 60. I am hoping the duals mount up with no issues. I wonder if i need some sort of spacer or adapter there. I am guessing it depends on my fenderwells on the utility bed (?) i have a rear axle out of a 71 or 72 c20 I plannto install for the 9/16" studs. Inbelieve that they are the same width though.

12-02-2017, 06:02 PM	#9
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,960	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings I'm not sure but I think with going with the 19.5s they will clear but not 100% sure I always just use a 14 bolt out of the squarebody trucks or a Dana 70 like in my 68 K/30

01-12-2018, 05:56 PM	#10
Kmay55 Registered User Join Date: Jan 2018 Location: Pisgah, Alabama Posts: 2	Re: WTB 8x6.5 Dually Wheel Stud Reinforcement Rings/ Clamp Rings Will these work? https://www.anythingtruck.com/product/220-33521.html I only need 2. I figure it will be hard to find someone who just has 2 they want to sell. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.