WTB 67-8 Steering Wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

breeh · 11-03-2003, 03:15 AM

I am looking for a 67-8 steering wheel that is original black. I already have one that I can paint if I can't find one. Also, I would like a chrome "Chevrolet" horn cap for the same with little to no pitting. If you have one that you would like to sell let me know. Thanks!

Erl · 11-03-2003, 09:49 AM

The Truck Shop in Orange County CA has them new.

cheyenne10 · 11-03-2003, 10:19 AM

Breeh;

Are you going to run this on a tilt column? I am hoping to do this and am still trying to find 1st hand knowledge of it working and fitting well.

Part of "my approved" restifications of these trucks.

breeh · 11-03-2003, 10:34 AM

cheyenne10, I am going to run it on a tilt. I will let you know how it goes.

cheyenne10 · 11-03-2003, 11:06 AM

Did they make a stock black column in 67/68? I have seen the silver, fawn, tan, gold, blue, green & red ones..... I have one repainted black by board member but for finished truck it may need redone. I always hoped to research prepping and painting one black myself but worry about paint holding up to daily use.

Good luck, I guess I'm not the only one with these good ideas!!

Slammed67 · 11-03-2003, 11:33 AM

Quote:

Are you going to run this on a tilt column? I am hoping to do this and am still trying to find 1st hand knowledge of it working and fitting well.

I'm running a 67-68 wheel on my tilt column in my '67 and it fits fine. I still need to paint mine though.

breeh · 11-03-2003, 12:32 PM

Come to think of it, I don't think that I have seen a black column/wheel before either in a 67-8. Hmmm...

Longhorn Man · 11-04-2003, 01:31 AM

FYI, the 67/68 steering wheel was run in the C/40 & bigger trucks well into the 80's. We have an 86 (I think) at the shop right now with a brand new looking wheel in it.
Just something else to look in when going through the junk yards.

breeh · 11-04-2003, 01:42 AM

Thanks for the info Andy! I will look in some of those as well.

**Canadian694x4** · 11-04-2003, 01:44 AM

Quote:

Originally posted by Longhorn Man
FYI, the 67/68 steering wheel was run in the C/40 & bigger trucks well into the 80's. We have an 86 (I think) at the shop right now with a brand new looking wheel in it.
Just something else to look in when going through the junk yards.

Good tip...I'll have to keep my eyes peeled...

stelth2002 · 11-04-2003, 09:07 PM

Breech, youll have a pm. I think i have a horn button for ya

sakohntr · 11-07-2003, 11:02 PM

breeh, i have a factory black 68' wheel that came from my ambulance. It has some cracks that will need to be repaired though. It needs a home....

breeh · 11-08-2003, 12:34 AM

sakohntr, how can I pass that up? Let me know where to send the shipping money!

breeh · 11-08-2003, 10:50 PM

TTT

11-03-2003, 03:15 AM	#1
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	WTB 67-8 Steering Wheel I am looking for a 67-8 steering wheel that is original black. I already have one that I can paint if I can't find one. Also, I would like a chrome "Chevrolet" horn cap for the same with little to no pitting. If you have one that you would like to sell let me know. Thanks! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-03-2003, 09:49 AM	#2
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	The Truck Shop in Orange County CA has them new. __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

11-03-2003, 10:19 AM	#3
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	running on tilt column Breeh; Are you going to run this on a tilt column? I am hoping to do this and am still trying to find 1st hand knowledge of it working and fitting well. Part of "my approved" restifications of these trucks. __________________ Bob

11-03-2003, 10:34 AM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	cheyenne10, I am going to run it on a tilt. I will let you know how it goes. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-03-2003, 11:06 AM	#5
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	another thought/? Did they make a stock black column in 67/68? I have seen the silver, fawn, tan, gold, blue, green & red ones..... I have one repainted black by board member but for finished truck it may need redone. I always hoped to research prepping and painting one black myself but worry about paint holding up to daily use. Good luck, I guess I'm not the only one with these good ideas!! __________________ Bob

11-03-2003, 12:32 PM	#7
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Come to think of it, I don't think that I have seen a black column/wheel before either in a 67-8. Hmmm... __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-04-2003, 01:31 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	FYI, the 67/68 steering wheel was run in the C/40 & bigger trucks well into the 80's. We have an 86 (I think) at the shop right now with a brand new looking wheel in it. Just something else to look in when going through the junk yards.

11-04-2003, 01:42 AM	#9
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Thanks for the info Andy! I will look in some of those as well. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-04-2003, 09:07 PM	#11
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Breech, youll have a pm. I think i have a horn button for ya __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

11-07-2003, 11:02 PM	#12
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	free breeh, i have a factory black 68' wheel that came from my ambulance. It has some cracks that will need to be repaired though. It needs a home.... __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

11-08-2003, 12:34 AM	#13
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	sakohntr, how can I pass that up? Let me know where to send the shipping money! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-08-2003, 10:50 PM	#14
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	TTT __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.