MI NEW Single Wall Top HOLD DOWN STRIPS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Utahboy** · 02-03-2018, 11:43 AM

Finally was able to get these made!! These are the Stainless Steel Hold Down Trim Strips for single wall tops. Made with the same thickness Stainless as the originals and then polished to a bright finish. Correctly formed to fit perfectly.
Only difference is the ends where the originals have a small bulb type corner that we were not able to duplicate. (See Pics)
$125 for a set shipped conus.
I can also provide the original type chrome hex bolts for an additional $15 for a quantity of ten.
Please reply to this thread if you would like a set. Thanks

**Beau2a** · 02-03-2018, 12:01 PM

Nice work. They look great

WAYNE G. · 02-03-2018, 12:16 PM

I wish i would have seen this 2 weeks ago. Just sent mine to chrome shop and I will spend double the amout then what you have for sale and is made out of stainless. Utahboy, i have purchased product from you and always equal or better than original. Great job, Wayne

**richard2717** · 02-03-2018, 12:31 PM

I will take a set of bolts if you will sell separately

rayray767 · 02-03-2018, 01:09 PM

Nice !!!!!!!

**tmontg01** · 02-03-2018, 02:01 PM

You’re making some amazing stuff!

60case · 02-03-2018, 04:27 PM

I will take one set of strips. Do you have any front carpet strips left.

71meangreenc10 · 02-03-2018, 05:09 PM

I'll take a set.

Smitty

**Blazerowner** · 02-03-2018, 09:13 PM

I’ll take two sets of these plus one set of bolts. PM total. Hopefully save on shipping for two?

Kendal · 02-05-2018, 01:10 PM

I'll take a pair plus bolts. Pm me info.

**mortoyz** · 02-05-2018, 01:30 PM

I'll take a pair plus bolts. Send payment to same Paypal as I did for carpet strips?

volkscafe · 02-05-2018, 09:15 PM

I'll take of set of the strips and bolts. Please PM me with PayPal details.

Thanks, Jared

Chadblum · 02-07-2018, 09:05 AM

I am interested in a set with the proper bolts. Please dm me your PayPal info. Thanks!!
Posted via Mobile Device

60case · 02-08-2018, 07:39 PM

I got the strips today. They look and fit good. Thanks

ls1nova71 · 02-10-2018, 02:25 PM

Quote:

Originally Posted by richard2717

I will take a set of bolts if you will sell separately

So would I.

larryd · 02-10-2018, 04:46 PM

I will take a set with bolts... PM me. Thanks

**richard2717** · 02-11-2018, 02:46 PM

Got the screws yesterday. Thanks

71meangreenc10 · 02-12-2018, 07:06 PM

Mine came in today. Awesome packaging and the product looks great.

Thanks,

Smitty

Paintpro · 02-12-2018, 08:08 PM

I will take set plus bolts. Let me know where to send payment to

Kendal · 02-15-2018, 09:42 PM

Got mine yesterday, the packaging was great! Thanks!

jjzepplin · 02-16-2018, 10:00 AM

I'll take a set with bolts please.

GSD Guy · 02-16-2018, 12:20 PM

I will also take a set with bolts please. PM me PP info.

Thanks!!

volkscafe · 02-16-2018, 12:49 PM

Received and installed. As always, excellent packaging and quality items.

jjzepplin · 02-20-2018, 07:29 AM

Payment sent. Cannot wait!

tocker1 · 02-21-2018, 01:21 PM

Ill take a set and bolts.

02-03-2018, 11:43 AM	#1
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 439	NEW Single Wall Top HOLD DOWN STRIPS Finally was able to get these made!! These are the Stainless Steel Hold Down Trim Strips for single wall tops. Made with the same thickness Stainless as the originals and then polished to a bright finish. Correctly formed to fit perfectly. Only difference is the ends where the originals have a small bulb type corner that we were not able to duplicate. (See Pics) $125 for a set shipped conus. I can also provide the original type chrome hex bolts for an additional $15 for a quantity of ten. Please reply to this thread if you would like a set. Thanks Attached Images

02-03-2018, 12:01 PM	#2
Beau2a Senior Member Join Date: Jan 2016 Location: Enumclaw WA Posts: 267	Re: NEW Single Wall Top HOLD DOWN STRIPS Nice work. They look great

02-03-2018, 12:16 PM	#3
WAYNE G. Registered User Join Date: Mar 2007 Location: augusta, ga. Posts: 157	Re: NEW Single Wall Top HOLD DOWN STRIPS I wish i would have seen this 2 weeks ago. Just sent mine to chrome shop and I will spend double the amout then what you have for sale and is made out of stainless. Utahboy, i have purchased product from you and always equal or better than original. Great job, Wayne

02-03-2018, 12:31 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,157	Re: NEW Single Wall Top HOLD DOWN STRIPS I will take a set of bolts if you will sell separately __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-03-2018, 01:09 PM	#5
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,135	Re: NEW Single Wall Top HOLD DOWN STRIPS Nice !!!!!!!

02-03-2018, 02:01 PM	#6
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: NEW Single Wall Top HOLD DOWN STRIPS You’re making some amazing stuff!

02-03-2018, 04:27 PM	#7
60case Registered User Join Date: Feb 2015 Location: friendship WI Posts: 174	Re: NEW Single Wall Top HOLD DOWN STRIPS I will take one set of strips. Do you have any front carpet strips left.

02-03-2018, 05:09 PM	#8
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: NEW Single Wall Top HOLD DOWN STRIPS I'll take a set. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

02-03-2018, 09:13 PM	#9
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,969	Re: NEW Single Wall Top HOLD DOWN STRIPS I’ll take two sets of these plus one set of bolts. PM total. Hopefully save on shipping for two? __________________ Kirk 72 Blazer CST 4wd highlander

02-05-2018, 01:10 PM	#10
Kendal Registered User Join Date: Jun 2017 Location: Chesapeake, Virginia Posts: 8	Re: NEW Single Wall Top HOLD DOWN STRIPS I'll take a pair plus bolts. Pm me info.

02-05-2018, 01:30 PM	#11
mortoyz Active Member Join Date: Nov 2008 Location: Maroa, IL Posts: 123	Re: NEW Single Wall Top HOLD DOWN STRIPS I'll take a pair plus bolts. Send payment to same Paypal as I did for carpet strips?

02-05-2018, 09:15 PM	#12
volkscafe Registered User Join Date: Jul 2015 Location: Merced, CA Posts: 36	Re: NEW Single Wall Top HOLD DOWN STRIPS I'll take of set of the strips and bolts. Please PM me with PayPal details. Thanks, Jared

02-07-2018, 09:05 AM	#13
Chadblum Registered User Join Date: Feb 2018 Location: Sierra vista az Posts: 4	Re: NEW Single Wall Top HOLD DOWN STRIPS I am interested in a set with the proper bolts. Please dm me your PayPal info. Thanks!! Posted via Mobile Device

02-08-2018, 07:39 PM	#14
60case Registered User Join Date: Feb 2015 Location: friendship WI Posts: 174	Re: NEW Single Wall Top HOLD DOWN STRIPS I got the strips today. They look and fit good. Thanks

02-10-2018, 04:46 PM	#16
larryd Registered User Join Date: Apr 2007 Location: quincy il Posts: 44	Re: NEW Single Wall Top HOLD DOWN STRIPS I will take a set with bolts... PM me. Thanks



Register or Log In To remove these advertisements.

02-11-2018, 02:46 PM	#17
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,157	Re: NEW Single Wall Top HOLD DOWN STRIPS Got the screws yesterday. Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-12-2018, 07:06 PM	#18
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: NEW Single Wall Top HOLD DOWN STRIPS Mine came in today. Awesome packaging and the product looks great. Thanks, Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

02-12-2018, 08:08 PM	#19
Paintpro Registered User Join Date: Nov 2008 Location: Hermann, MO Posts: 28	Re: NEW Single Wall Top HOLD DOWN STRIPS I will take set plus bolts. Let me know where to send payment to

02-15-2018, 09:42 PM	#20
Kendal Registered User Join Date: Jun 2017 Location: Chesapeake, Virginia Posts: 8	Re: NEW Single Wall Top HOLD DOWN STRIPS Got mine yesterday, the packaging was great! Thanks!

02-16-2018, 10:00 AM	#21
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: NEW Single Wall Top HOLD DOWN STRIPS I'll take a set with bolts please. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-16-2018, 12:20 PM	#22
GSD Guy Registered User Join Date: Jul 2010 Location: Jacksonville, FL Posts: 85	Re: NEW Single Wall Top HOLD DOWN STRIPS I will also take a set with bolts please. PM me PP info. Thanks!!

02-16-2018, 12:49 PM	#23
volkscafe Registered User Join Date: Jul 2015 Location: Merced, CA Posts: 36	Re: NEW Single Wall Top HOLD DOWN STRIPS Received and installed. As always, excellent packaging and quality items.

02-20-2018, 07:29 AM	#24
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: NEW Single Wall Top HOLD DOWN STRIPS Payment sent. Cannot wait! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-21-2018, 01:21 PM	#25
tocker1 Registered User Join Date: Jun 2015 Location: Modesto Ca Posts: 82	Re: NEW Single Wall Top HOLD DOWN STRIPS Ill take a set and bolts.

Register or Log In To remove these advertisements.