Anyone convert to a hydraulic clutch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raidmagic · 02-15-2018, 03:54 PM

As asked? I'm considering swapping from the cable deal to a hydraulic and was wondering what was needed. I'm getting ready to swap a 350/4speed into the truck and think it would make it a nicer driver. Other than that. What have you done to make the clutch pedal easier to push? It works well, not binding but if you get caught up in traffic it can make you tired. lol

**The Rocknrod** · 02-15-2018, 04:43 PM

Captainfab to the rescue, contact him on that:
http://67-72chevytrucks.com/vboard/s...04&postcount=4
Also lots of info on that here:
http://67-72chevytrucks.com/vboard/s...d.php?t=577322

padresag · 02-15-2018, 05:32 PM

Quote:

Originally Posted by raidmagic

As asked? I'm considering swapping from the cable deal to a hydraulic and was wondering what was needed. I'm getting ready to swap a 350/4speed into the truck and think it would make it a nicer driver. Other than that. What have you done to make the clutch pedal easier to push? It works well, not binding but if you get caught up in traffic it can make you tired. lol

what do you mean cable deal?
ron

raidmagic · 02-15-2018, 11:25 PM

Quote:

Originally Posted by The Rocknrod

Captainfab to the rescue, contact him on that:
http://67-72chevytrucks.com/vboard/s...04&postcount=4
Also lots of info on that here:
http://67-72chevytrucks.com/vboard/s...d.php?t=577322

Is he a member here?

raidmagic · 02-15-2018, 11:25 PM

Quote:

Originally Posted by padresag

what do you mean cable deal?
ron

I misspoke. Rods and linkage.

**Captainfab** · 02-16-2018, 12:29 AM

Thanks for the mention Rocknrod

Here is the for sale thread for the '63-'66 booster bracket with the hydraulic clutch conversion.

http://www.67-72chevytrucks.com/vboa...d.php?t=651200

Quote:

Originally Posted by The Rocknrod

Captainfab to the rescue, contact him on that:
http://67-72chevytrucks.com/vboard/s...04&postcount=4
Also lots of info on that here:
http://67-72chevytrucks.com/vboard/s...d.php?t=577322

I've been a member since 2007 and a paid vendor since 2009.

Quote:

Originally Posted by raidmagic

Is he a member here?

raidmagic · 02-16-2018, 08:32 AM

Quote:

Originally Posted by Captainfab

Thanks for the mention Rocknrod

Here is the for sale thread for the '63-'66 booster bracket with the hydraulic clutch conversion.

http://www.67-72chevytrucks.com/vboa...d.php?t=651200

I've been a member since 2007 and a paid vendor since 2009.

Cool, I asked some questions in your thread.

maydaymike · 02-17-2018, 10:44 AM

I recently installed the clutch linkage kit from LMC thats made with the tubing and Heim joints/spherical rod ends. That, and replacing the little fork shaped thing that goes on the end of the rod to push on the clutch fork, as well as greasing everything up, significantly lightened the effort necessary to push in the clutch. Another plus...the clutch linkage doesn't rattle any more going down the road, either!

raidmagic · 02-17-2018, 10:06 PM

Interesting. Thanks for that info.

LVPhotos · 02-18-2018, 02:34 PM

Hydraulic bearing, because header clearance and new tko 600

raidmagic · 02-18-2018, 05:50 PM

Quote:

Originally Posted by LVPhotos

Hydraulic bearing, because header clearance and new tko 600

Can this be used on a Super T-10?

burlapen · 02-18-2018, 06:10 PM

I used captain fabs pedal kit with a wilwood hyd master on a T56. Very happy with it. light-med pedal pressure.

LVPhotos · 02-18-2018, 07:04 PM

Quote:

Originally Posted by raidmagic

Can this be used on a Super T-10?

Its a Mcleod, I am sure they have something. Slip on or bolt on snout.
https://www.mcleodracing.com/index.php/hydraulics.html

02-15-2018, 03:54 PM	#1
raidmagic Registered User Join Date: Jan 2015 Location: Tampa, Fl. Posts: 426	Anyone convert to a hydraulic clutch? As asked? I'm considering swapping from the cable deal to a hydraulic and was wondering what was needed. I'm getting ready to swap a 350/4speed into the truck and think it would make it a nicer driver. Other than that. What have you done to make the clutch pedal easier to push? It works well, not binding but if you get caught up in traffic it can make you tired. lol

02-15-2018, 04:43 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Anyone convert to a hydraulic clutch? Captainfab to the rescue, contact him on that: http://67-72chevytrucks.com/vboard/s...04&postcount=4 Also lots of info on that here: http://67-72chevytrucks.com/vboard/s...d.php?t=577322 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-17-2018, 10:44 AM	#8
maydaymike Registered User Join Date: Mar 2008 Location: Jasper,AL Posts: 47	Re: Anyone convert to a hydraulic clutch? I recently installed the clutch linkage kit from LMC thats made with the tubing and Heim joints/spherical rod ends. That, and replacing the little fork shaped thing that goes on the end of the rod to push on the clutch fork, as well as greasing everything up, significantly lightened the effort necessary to push in the clutch. Another plus...the clutch linkage doesn't rattle any more going down the road, either!

02-17-2018, 10:06 PM	#9
raidmagic Registered User Join Date: Jan 2015 Location: Tampa, Fl. Posts: 426	Re: Anyone convert to a hydraulic clutch? Interesting. Thanks for that info.

02-18-2018, 02:34 PM	#10
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: Anyone convert to a hydraulic clutch? Hydraulic bearing, because header clearance and new tko 600 Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

02-18-2018, 06:10 PM	#12
burlapen Registered User Join Date: Aug 2005 Location: Clovis, Ca Posts: 134	Re: Anyone convert to a hydraulic clutch? I used captain fabs pedal kit with a wilwood hyd master on a T56. Very happy with it. light-med pedal pressure. __________________ 63 Chevy C-10 My build thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.