Engine mount fab tech - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**botoepfer** · 03-01-2018, 02:52 PM

Hello I must confess I am a fan of the inline 6 for a few reasons but most of all its cool factor I have a 63 with a 230 and I picked up a 292 , we all know about the motor mounts that don't line up,, and I know some offer mounts that work with the install of an elec fuel pump.. what I am looking for is some form of fab tech that can show me how to build a mount and retain the stock fuel pump.
1. I have been told the chassis are all drilled for te 292 mount I don't know that to be true,,

2, if they are drilled what support the mount being the cross member is not under the pass. side mount. !

3. I don't want to go through a crazy involved chassis rebuild but willing to listen to all,,

Thanks

padresag · 03-01-2018, 03:02 PM

just buy the right side perch off someone. another current thread spoke of them . i have one. so they are avail
ron

**The Rocknrod** · 03-01-2018, 03:04 PM

Neat "stuff" - https://www.12bolt.com/store/p140/St...0-250-292.html
or - https://www.12bolt.com/store/p40/Ste...t_Adaptor.html

**botoepfer** · 03-01-2018, 08:40 PM

Quote:

Originally Posted by The Rocknrod

Neat "stuff" - https://www.12bolt.com/store/p140/St...0-250-292.html
or - https://www.12bolt.com/store/p40/Ste...t_Adaptor.html

Tom shows two steel models on his site do you know which one fits in a C10

**The Rocknrod** · 03-01-2018, 10:36 PM

I'm sorry, I've been sick with a chest cold n cough for a couple weeks and am taking everything I can get my hands on to be here. I didn't read what your needs were when I posted the info. Head is out of wack more than normal.

03-01-2018, 02:52 PM	#1
botoepfer Active Member Join Date: Dec 2017 Location: Prince Frederick/obx Posts: 116	Engine mount fab tech Hello I must confess I am a fan of the inline 6 for a few reasons but most of all its cool factor I have a 63 with a 230 and I picked up a 292 , we all know about the motor mounts that don't line up,, and I know some offer mounts that work with the install of an elec fuel pump.. what I am looking for is some form of fab tech that can show me how to build a mount and retain the stock fuel pump. 1. I have been told the chassis are all drilled for te 292 mount I don't know that to be true,, 2, if they are drilled what support the mount being the cross member is not under the pass. side mount. ! 3. I don't want to go through a crazy involved chassis rebuild but willing to listen to all,, Thanks

03-01-2018, 03:02 PM	#2
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Engine mount fab tech just buy the right side perch off someone. another current thread spoke of them . i have one. so they are avail ron

03-01-2018, 03:04 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Engine mount fab tech Neat "stuff" - https://www.12bolt.com/store/p140/St...0-250-292.html or - https://www.12bolt.com/store/p40/Ste...t_Adaptor.html __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-01-2018, 10:36 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Engine mount fab tech I'm sorry, I've been sick with a chest cold n cough for a couple weeks and am taking everything I can get my hands on to be here. I didn't read what your needs were when I posted the info. Head is out of wack more than normal. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.