Center Rear Axle with 4"lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyguy_72 · 03-08-2018, 06:44 PM

Is there a way to center the rear axle in the wheel well after a 4"in lift?
I bought my blazer with the skyjacker lift already installed... the tire is definitely closer to the front side of the wheel well than the back... is there an easyish way to fix this? Not concerned about drive line as im already in the market for a replacement. I see this same situation in lots of pics on here but could find a fix in searching...
Thanks.

**A1971Blazer** · 03-08-2018, 07:43 PM

ORD......zero rate add a leaf...allows you to relocate the axle forward or backward 1" to 1½
http://www.offroaddesign.com/catalog/Zero%20Rates.htm

I don't sell or offer to sell these...just passing along the info

Not a bronco · 03-09-2018, 08:01 PM

i would go with this for the rear, its the same thing as the one in the post above but its 1/4 inch thick rather than 1 inch thick and a little cheaper. i have one to but still need to install it.

http://offroaddesign.com/catalog/Axl...%20Plates.html

chevyguy_72 · 03-10-2018, 01:09 AM

Thanks guys... I was about to order sway bar parts from there anyway... Might save on some shipping...

03-08-2018, 06:44 PM	#1
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Center Rear Axle with 4"lift Is there a way to center the rear axle in the wheel well after a 4"in lift? I bought my blazer with the skyjacker lift already installed... the tire is definitely closer to the front side of the wheel well than the back... is there an easyish way to fix this? Not concerned about drive line as im already in the market for a replacement. I see this same situation in lots of pics on here but could find a fix in searching... Thanks. __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax

03-08-2018, 07:43 PM	#2
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,199	Re: Center Rear Axle with 4"lift ORD......zero rate add a leaf...allows you to relocate the axle forward or backward 1" to 1½ http://www.offroaddesign.com/catalog/Zero%20Rates.htm I don't sell or offer to sell these...just passing along the info __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

03-09-2018, 08:01 PM	#3
Not a bronco Registered User Join Date: Jul 2017 Location: Eden utah Posts: 32	Re: Center Rear Axle with 4"lift i would go with this for the rear, its the same thing as the one in the post above but its 1/4 inch thick rather than 1 inch thick and a little cheaper. i have one to but still need to install it. http://offroaddesign.com/catalog/Axl...%20Plates.html

03-10-2018, 01:09 AM	#4
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Center Rear Axle with 4"lift Thanks guys... I was about to order sway bar parts from there anyway... Might save on some shipping... __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.