The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-02-2018, 10:45 PM   #1
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
new grey wheels

OK, this has been hashed over a few times, but my situation is I need help finding a set of wheels that match my suspension. I'm wanting a complete set of wheels front and back that go on my 56 chevy truck, with a 2nd Camaro suspension/rear end. I have 15" wheels on it now, and what I am wanting is grey spoked mag wheels, 15x7's with 4.50" back spacing. I'm not aware at this moment what my offset is, but I know I would like to find wheels based upon my current measurements and desires. So as you can see, I'm needing your help, can you locate a name of wheel I can look at for my truck? I've looked at American Racing and Vision wheels, they are close, but I cannot find the 4.5" backspacing I need. I'll thank you in advance. Pictures would be greatly appreciated.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-02-2018, 11:44 PM   #2
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,343
Re: new grey wheels

Try Coys, Boss 338's
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 05-03-2018, 12:00 AM   #3
59chev
Registered User
 
59chev's Avatar
 
Join Date: Apr 2007
Location: Calgary, Alberta
Posts: 441
Re: new grey wheels

Not sure about the backspacing but look at Rocket Racing Wheels..
__________________
My Build Thread: 59 Apache - Lifelong obsession

http://67-72chevytrucks.com/vboard/showthread.php?t=622133"]59 Apache - Lifelong obsession
59chev is offline   Reply With Quote
Old 05-03-2018, 03:12 AM   #4
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: new grey wheels

I entered your parameters (15 tall, 7 wide, 4.50 backspacing, Chevy lug pattern, grey color) into Summit Racing's wheel selector and found four choices. Play around with the options, you may find lots more - for example unilug pattern may bring up many more options:

https://www.summitracing.com/search/...7%2B4294920801
MiraclePieCo is offline   Reply With Quote
Old 05-03-2018, 08:10 AM   #5
Jemezcrusher
Registered User
 
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 435
Re: new grey wheels

Quote:
Originally Posted by my56chevytruck View Post
OK, this has been hashed over a few times, but my situation is I need help finding a set of wheels that match my suspension. I'm wanting a complete set of wheels front and back that go on my 56 chevy truck, with a 2nd Camaro suspension/rear end. I have 15" wheels on it now, and what I am wanting is grey spoked mag wheels, 15x7's with 4.50" back spacing. I'm not aware at this moment what my offset is, but I know I would like to find wheels based upon my current measurements and desires. So as you can see, I'm needing your help, can you locate a name of wheel I can look at for my truck? I've looked at American Racing and Vision wheels, they are close, but I cannot find the 4.5" backspacing I need. I'll thank you in advance. Pictures would be greatly appreciated.
I got custom backspacing on my torque thrusts from Discount Tire
Jemezcrusher is offline   Reply With Quote
Old 05-03-2018, 09:14 AM   #6
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by Dan in Pasadena View Post
Try Coys, Boss 338's
thanx Dan, I'll try them.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-03-2018, 09:15 AM   #7
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by Jemezcrusher View Post
I got custom backspacing on my torque thrusts from Discount Tire
I'll check that option out.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-03-2018, 09:16 AM   #8
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by 59chev View Post
Not sure about the backspacing but look at Rocket Racing Wheels..
this is why we ask for help, you guys are there to assist. Thanks
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-03-2018, 12:56 PM   #9
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,343
Re: new grey wheels

It’s looking like I’m gonna need to buy custom backspacing too. I bought used Boyds because they were uber cheap, had them polished, etc and now that I am putting my bedwood on it’s apparent the inside tire sidewall is too close to the wood, and this is without the bedside being on! I’ll use washers to determine how thick a spacer will work but I really don’t like the idea of using spacers long term. Once my bedsides & fenders are on I’ll be able to accurately determine the backspacing and maybe get a wider rear wheel under there. Besides, I want gray spokes too!
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 05-03-2018, 04:22 PM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: new grey wheels

The 15 x7 with 4.04 comes closest on a 5 spoke . http://www.americanracing.com/wheel/...torq-thrust-ii

If you go to 8 inch wide you can get deeper back spacing.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 05-04-2018, 12:35 AM   #11
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by Dan in Pasadena View Post
It’s looking like I’m gonna need to buy custom backspacing too. I bought used Boyds because they were uber cheap, had them polished, etc and now that I am putting my bedwood on it’s apparent the inside tire sidewall is too close to the wood, and this is without the bedside being on! I’ll use washers to determine how thick a spacer will work but I really don’t like the idea of using spacers long term. Once my bedsides & fenders are on I’ll be able to accurately determine the backspacing and maybe get a wider rear wheel under there. Besides, I want gray spokes too!
Dan,
I'm going to go with a set from Rocket Racing (thanks to 59CHEV.The truck I have is grey and the style of wheels is also grey. How much room do you have between your bed and outside fender lip? What style/color of wheel are you looking for? Look up Rocket Racing wheels as well as Vision wheels.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-04-2018, 06:27 PM   #12
59chev
Registered User
 
59chev's Avatar
 
Join Date: Apr 2007
Location: Calgary, Alberta
Posts: 441
Re: new grey wheels

Great to hear! I think those will look great on your truck. I was seriously considering the "Rocket Fuel" for my build until I found a set of powdercoated z28 5 spoke rallys that I couldn't pass up.

Which ones are you getting?
__________________
My Build Thread: 59 Apache - Lifelong obsession

http://67-72chevytrucks.com/vboard/showthread.php?t=622133"]59 Apache - Lifelong obsession
59chev is offline   Reply With Quote
Old 05-04-2018, 09:57 PM   #13
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,343
Re: new grey wheels

Quote:
Originally Posted by my56chevytruck View Post
... How much room do you have between your bed and outside fender lip? What style/color of wheel are you looking for? Look up Rocket Racing wheels as well as Vision wheels.
Glad you found some you like.

I have no idea how much room I have because my bed hasn't been together since I tore it down for paint. But I DO know that the inner tire sidewall is too DAMN close to the wood so it will be even closer to the bedsides, maybe touching - I'll have to do something, I just don't know what yet. The bedsides will go on tomorrow (fingers crossed) and the fenders next week - they're still at the painter's shop.

Basically, I like the classic five spoke Torq Thrust. I have to have at least 16's to clear my front calipers but since there isn't much tire selection in 16's I will go with 17's. I also really like Salt Flat wheels but probably not enough choose them over classic TT's.
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 05-05-2018, 10:59 AM   #14
Black_Sheep
Registered User
 
Black_Sheep's Avatar
 
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
Re: new grey wheels

Dan your truck looked great with Torque Thrust wheels on it. They are available in 17” which should clear all but the biggest brake kits without looking too big.
Black_Sheep is offline   Reply With Quote
Old 05-06-2018, 10:17 PM   #15
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by 59chev View Post
Great to hear! I think those will look great on your truck. I was seriously considering the "Rocket Fuel" for my build until I found a set of powdercoated z28 5 spoke rallys that I couldn't pass up.

Which ones are you getting?
I bought the Rocket Racing Fuel Gray's. of course they have to order them now, will take about 3 weeks to get them.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-06-2018, 10:19 PM   #16
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by Dan in Pasadena View Post
Glad you found some you like.

I have no idea how much room I have because my bed hasn't been together since I tore it down for paint. But I DO know that the inner tire sidewall is too DAMN close to the wood so it will be even closer to the bedsides, maybe touching - I'll have to do something, I just don't know what yet. The bedsides will go on tomorrow (fingers crossed) and the fenders next week - they're still at the painter's shop.

Basically, I like the classic five spoke Torq Thrust. I have to have at least 16's to clear my front calipers but since there isn't much tire selection in 16's I will go with 17's. I also really like Salt Flat wheels but probably not enough choose them over classic TT's.
I highly suggest you talk to Summit Racing on their technical service line, 330/630-0240. With the right backspacing and offset you should be fine. Good luck Dan
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-06-2018, 10:21 PM   #17
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by 59chev View Post
Not sure about the backspacing but look at Rocket Racing Wheels..
Thanks again for your help.
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-11-2018, 04:57 PM   #18
my56chevytruck
Registered User
 
my56chevytruck's Avatar
 
Join Date: Feb 2016
Location: Hebron
Posts: 1,153
Re: new grey wheels

Quote:
Originally Posted by 59chev View Post
Not sure about the backspacing but look at Rocket Racing Wheels..
I want to thank you 59chev for your wheel recommendations. I got my Rocket Racing wheels the other day thru Summit Racing and mounted them today. The tire selection I made was going from 235/75/r15's in the rear to 255/60/r15's but stayed with the 215/70/r15's in the front. Due to the 4.25" backspacing all around, i'm thinking the issue of front tire rub will significantly be eliminated
Attached Images
  
__________________
RUBBER DOWN AND HIT THE ROAD!!!
1940 Ford Dlx Coupe
1969 Mach1
my56chevytruck is offline   Reply With Quote
Old 05-12-2018, 12:47 AM   #19
59chev
Registered User
 
59chev's Avatar
 
Join Date: Apr 2007
Location: Calgary, Alberta
Posts: 441
Re: new grey wheels

You are welcome. Glad they worked out. Looks sweet on your truck!!
__________________
My Build Thread: 59 Apache - Lifelong obsession

http://67-72chevytrucks.com/vboard/showthread.php?t=622133"]59 Apache - Lifelong obsession
59chev is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com