Yet another brake question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rac65 · 06-01-2018, 09:51 PM

I know there has been several discussions here about which brake line goes where but I still have some confusion. My 65 has two sizes of brake line. On the original single reservoir there was a big line that went to the front brakes and then split into a smaller line to the back. I bought a master for a 67 which has two different size holes and I put my larger line in the larger port but that puts it at the rear of the master and I thought the front brakes were supposed to feed from the front port. Will it be okay this way or do I need to get some adapters and swap them. It is standard non power drum brakes.

**jayoldschool** · 06-01-2018, 10:21 PM

Take your master to the parts store. Get nuts that fit in the ports. Front port to front, rear to rear.

**Captainfab** · 06-02-2018, 02:06 AM

With the '67-'70 master cylinders, the front port is the front brakes and the rear is rear brakes. You will need either adapter fittings or change the lines accordingly.

Rac65 · 06-02-2018, 08:48 AM

Thanks guys. Looks like I'm off to the parts store....again.

06-01-2018, 09:51 PM	#1
Rac65 Registered User Join Date: Aug 2011 Location: Shepherd, Texas Posts: 83	Yet another brake question. I know there has been several discussions here about which brake line goes where but I still have some confusion. My 65 has two sizes of brake line. On the original single reservoir there was a big line that went to the front brakes and then split into a smaller line to the back. I bought a master for a 67 which has two different size holes and I put my larger line in the larger port but that puts it at the rear of the master and I thought the front brakes were supposed to feed from the front port. Will it be okay this way or do I need to get some adapters and swap them. It is standard non power drum brakes.

06-01-2018, 10:21 PM	#2
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: Yet another brake question. Take your master to the parts store. Get nuts that fit in the ports. Front port to front, rear to rear.

06-02-2018, 02:06 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Yet another brake question. With the '67-'70 master cylinders, the front port is the front brakes and the rear is rear brakes. You will need either adapter fittings or change the lines accordingly. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-02-2018, 08:48 AM	#4
Rac65 Registered User Join Date: Aug 2011 Location: Shepherd, Texas Posts: 83	Re: Yet another brake question. Thanks guys. Looks like I'm off to the parts store....again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.