Transfer Cases - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-09-2018, 11:09 AM

I have some 70-72 (maybe later?) NP205s I want to get rid of. Just the transfer cases alone. I can take pictures, but you all know what they look like. What are they worth alone?

I also have a complete 3spd/Dana20 (I think) set-up incl front drive shaft and bell housing. Not looking to get all I can. More like I want to see someone use this and I want it gone. I have no use for it.

The 205s I don't mind keeping if they don't bring decent money. I have trucks with those.

All this stuff comes out of a storage shed. Been stored dry inside the whole time.

I also have a couple motors out of trucks. One's a 327 and the other is a 350. Very complete yet. What do people pay for used complete engines? I think I'll keep one to build a 383 and keep my correct '72 K/20 engine in tact. I need to check if the 327 is a late large journal. IIRC the suffix code also ties it to a 350 application. I need to get the numbers again and check. I've had this stuff a long time. Need it gone.

**too much stuff** · 06-10-2018, 09:05 AM

Around here, the 205s would be around $200 each. However I haven't come across any for awhile. The 3speed dana 20 I couldn't hardly give away the last one I had.

Engines, maybe $200-$600 depending on completeness and application.

*Harlowhead1972* · 06-10-2018, 09:35 AM

Prices are similar here. I bit more on the 205's since this is 4x4 country. The ones that mate to automatics seem to be more difficult to find and usually bring $400-500. Harlow

**special-K** · 06-11-2018, 09:39 AM

Thanks again. Pretty much what I was thinking on all of it. I used to scrap Dana20s but I think any part is worth something to someone these days. One of those things I'd pretty much give away if someone needs it. This is a complete drop out assembly, which should help it for those with imagination and ambition. But also great spare for a bone stock resto

06-09-2018, 11:09 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Transfer Cases I have some 70-72 (maybe later?) NP205s I want to get rid of. Just the transfer cases alone. I can take pictures, but you all know what they look like. What are they worth alone? I also have a complete 3spd/Dana20 (I think) set-up incl front drive shaft and bell housing. Not looking to get all I can. More like I want to see someone use this and I want it gone. I have no use for it. The 205s I don't mind keeping if they don't bring decent money. I have trucks with those. All this stuff comes out of a storage shed. Been stored dry inside the whole time. I also have a couple motors out of trucks. One's a 327 and the other is a 350. Very complete yet. What do people pay for used complete engines? I think I'll keep one to build a 383 and keep my correct '72 K/20 engine in tact. I need to check if the 327 is a late large journal. IIRC the suffix code also ties it to a 350 application. I need to get the numbers again and check. I've had this stuff a long time. Need it gone. Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-10-2018, 09:05 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Transfer Cases Around here, the 205s would be around $200 each. However I haven't come across any for awhile. The 3speed dana 20 I couldn't hardly give away the last one I had. Engines, maybe $200-$600 depending on completeness and application. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-10-2018, 09:35 AM	#3
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: Transfer Cases Prices are similar here. I bit more on the 205's since this is 4x4 country. The ones that mate to automatics seem to be more difficult to find and usually bring $400-500. Harlow

06-11-2018, 09:39 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Transfer Cases Thanks again. Pretty much what I was thinking on all of it. I used to scrap Dana20s but I think any part is worth something to someone these days. One of those things I'd pretty much give away if someone needs it. This is a complete drop out assembly, which should help it for those with imagination and ambition. But also great spare for a bone stock resto __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.