1950 chevy 3600 brake help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1950 greybeard · 06-09-2018, 11:29 AM

it seems everyone's parts cat. shows front and rear shoes being the same and they aren't...does anyone know of a good supplier?

**mr48chev** · 06-09-2018, 07:25 PM

You might check and see if there is a brake and clutch shop in your area that still rebuilds brake shoes.

On the other hand looking at both Napaonline and Autozone they show a 141 brake shoe that is 11 x 1-3/4 for both front and rear. Does your truck have a 50 rear axle in it or does it possibly have a later rear axle with Bendix brakes? A clear photo of what you have might help.

Huck brakes like the front probably has will have adjuster wheels on the sides of the wheel cylinder while Bendix brakes will have the adjuster at the bottom like most later model rigs with drum brakes do.

1950 greybeard · 06-10-2018, 09:10 AM

this has the Hucks brakes and to the best of my knowledge it is the origonal rear end. The anchor pin is roughly a 1/4 in larger in Dia. than the front

06-09-2018, 11:29 AM	#1
1950 greybeard Registered User Join Date: Jan 2016 Location: lacrosse wi Posts: 2	1950 chevy 3600 brake help it seems everyone's parts cat. shows front and rear shoes being the same and they aren't...does anyone know of a good supplier?

06-09-2018, 07:25 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: 1950 chevy 3600 brake help You might check and see if there is a brake and clutch shop in your area that still rebuilds brake shoes. On the other hand looking at both Napaonline and Autozone they show a 141 brake shoe that is 11 x 1-3/4 for both front and rear. Does your truck have a 50 rear axle in it or does it possibly have a later rear axle with Bendix brakes? A clear photo of what you have might help. Huck brakes like the front probably has will have adjuster wheels on the sides of the wheel cylinder while Bendix brakes will have the adjuster at the bottom like most later model rigs with drum brakes do. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-10-2018, 09:10 AM	#3
1950 greybeard Registered User Join Date: Jan 2016 Location: lacrosse wi Posts: 2	Re: 1950 chevy 3600 brake help this has the Hucks brakes and to the best of my knowledge it is the origonal rear end. The anchor pin is roughly a 1/4 in larger in Dia. than the front



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.