LTB Fender Flares - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 11-13-2003, 06:29 AM

Anybody know who makes a good, exact fit fender flare for a 1990 GMC Sierra 4x4 Short Bed? Is GM the only company that fits all the contours of the stock fenders? Looking for front and rears.

Thanks,

72

chevynut · 11-28-2003, 06:21 PM

I have a set of brand new factory GM fender flares for 88-98 Chevy/GMC 4x4 trucks that I was going to use when I lifted my truck. I no longer have the lift and would like to sell the flares.

They are not in the original boxes anymore but are brand new.

I would let them go for $150 plus shipping.

Let me know and I can take some pics if needed.

Thanks,

*72longbed* · 11-28-2003, 09:55 PM

Mike,
I'm very interested if it's a NEW set of front and back flares. Can you take some pics and send to me at:

philwec@fast.net

Thank you,

72longbed

phantom dually · 11-29-2003, 01:53 AM

If 72 longbed dont want them I will pay asap!! Thanks

*72longbed* · 11-29-2003, 02:47 PM

phantom dually,

One thing I don't appreciate is what I call a "bottom feeder"!! I hope you will respect that this is my Thread and it is I that has searched for a long time to find the parts I am looking for here! I have seen this happen before, and I hope you or anyone else doesn't attempt to buy these "out from under me" until I have passed up my opportunity first, for that will bring a $hitload of trouble your way!

Lets just all be careful here that we respect each other properly.

Thank you.

72longbed

phantom dually · 11-30-2003, 02:21 AM

If you read my post it clearly says that IF 72longbed doesnt want them I will pay asap. This means that if you dont want them I do. Do not threaten me in any way because I highly doubt it that you can do sh!t anyway. Further more I really dont appreciate your rude comments that could have been sent in a PM form. Sounds like your trying to push your way around here but Im not intimidated. What possible trouble could you bring me from PA to KY?

*72longbed* · 11-30-2003, 12:53 PM

p.d.
I did not threaten you, and I'm sorry if you took it that way. I was only refering to the Administrative sanctions that are available against those who violate the rules of the Board. I don't feel that you have violated any rules at this time. The wording of your response to my thread appeared to say you would take them now, no questions asked. I have had a couple of experiences on this Board where other members have gone behind my back to 'undermine' a sale. My response was more of a general warning to those who might try to do this again.

I'm posting this message to you in this Thread so everyone can see that I appologize to you for my over sensitive position lately when it comes to purchases on this Board. It sticks with a person when they get screwed, and I guess I need to chill about it.

Again, sorry for my harsh words.

72

*72longbed* · 11-30-2003, 01:19 PM

Mike,
they look good, I'll buy them. My zip is 19525, please let me know how much shipping is.

Thank you,

72longbed

chevynut · 11-30-2003, 05:08 PM

will get you shipping cost tomorrow when I go to work.

Thanks, Mike

11-13-2003, 06:29 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	LTB Fender Flares Anybody know who makes a good, exact fit fender flare for a 1990 GMC Sierra 4x4 Short Bed? Is GM the only company that fits all the contours of the stock fenders? Looking for front and rears. Thanks, 72

11-28-2003, 06:21 PM	#2
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	I have a set of brand new factory GM fender flares for 88-98 Chevy/GMC 4x4 trucks that I was going to use when I lifted my truck. I no longer have the lift and would like to sell the flares. They are not in the original boxes anymore but are brand new. I would let them go for $150 plus shipping. Let me know and I can take some pics if needed. Thanks, __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454

11-28-2003, 09:55 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Fender Flares Mike, I'm very interested if it's a NEW set of front and back flares. Can you take some pics and send to me at: philwec@fast.net Thank you, 72longbed

11-29-2003, 01:53 AM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If 72 longbed dont want them I will pay asap!! Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-29-2003, 02:47 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	phantom dually phantom dually, One thing I don't appreciate is what I call a "bottom feeder"!! I hope you will respect that this is my Thread and it is I that has searched for a long time to find the parts I am looking for here! I have seen this happen before, and I hope you or anyone else doesn't attempt to buy these "out from under me" until I have passed up my opportunity first, for that will bring a $hitload of trouble your way! Lets just all be careful here that we respect each other properly. Thank you. 72longbed

11-30-2003, 02:21 AM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If you read my post it clearly says that IF 72longbed doesnt want them I will pay asap. This means that if you dont want them I do. Do not threaten me in any way because I highly doubt it that you can do sh!t anyway. Further more I really dont appreciate your rude comments that could have been sent in a PM form. Sounds like your trying to push your way around here but Im not intimidated. What possible trouble could you bring me from PA to KY? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-30-2003, 12:53 PM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	p.d. I did not threaten you, and I'm sorry if you took it that way. I was only refering to the Administrative sanctions that are available against those who violate the rules of the Board. I don't feel that you have violated any rules at this time. The wording of your response to my thread appeared to say you would take them now, no questions asked. I have had a couple of experiences on this Board where other members have gone behind my back to 'undermine' a sale. My response was more of a general warning to those who might try to do this again. I'm posting this message to you in this Thread so everyone can see that I appologize to you for my over sensitive position lately when it comes to purchases on this Board. It sticks with a person when they get screwed, and I guess I need to chill about it. Again, sorry for my harsh words. 72

11-30-2003, 01:19 PM	#8
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	chevynut Mike, they look good, I'll buy them. My zip is 19525, please let me know how much shipping is. Thank you, 72longbed

11-30-2003, 05:08 PM	#9
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	will get you shipping cost tomorrow when I go to work. Thanks, Mike __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.