Stepside fender to bed panel bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88k5jimmy · 09-03-2018, 10:04 PM

I've searched and can't find my answer. I know the head of the bolt is phillips but I've read on here it is a special kind of phillips. Can someone tell me what kind of phillips it is? I'm trying to find longer ones.

Thanks.

hambone61 · 09-03-2018, 10:30 PM

I think what you're referring to is the clutch head. They make both Phillips and clutch, which takes a clutch driver.

88k5jimmy · 09-05-2018, 09:38 AM

There’s a specific Phillips bit that is made for the larger/oversized Phillips bolts, like factory bolts. That’s what I’m looking for.

Thanks

**The Rocknrod** · 09-05-2018, 09:56 AM

Phillips head screwdrivers come in five sizes, numbered from 0 to 4.
Phillips head screw sizes are based on numbers as well, ranging from 0 to 24.
I use a P4 (or #4) on the Phillips fender screws I have.
https://www.sears.com/craftsman-no-4...1&blockType=G1
They also make bits for ratchets in this size.

09-03-2018, 10:04 PM	#1
88k5jimmy Registered User Join Date: Mar 2014 Location: Tulsa OK Posts: 96	Stepside fender to bed panel bolt I've searched and can't find my answer. I know the head of the bolt is phillips but I've read on here it is a special kind of phillips. Can someone tell me what kind of phillips it is? I'm trying to find longer ones. Thanks.

09-03-2018, 10:30 PM	#2
hambone61 Registered User Join Date: Oct 2016 Location: south alabama Posts: 43	Re: Stepside fender to bed panel bolt I think what you're referring to is the clutch head. They make both Phillips and clutch, which takes a clutch driver. Attached Images

09-05-2018, 09:38 AM	#3
88k5jimmy Registered User Join Date: Mar 2014 Location: Tulsa OK Posts: 96	Re: Stepside fender to bed panel bolt There’s a specific Phillips bit that is made for the larger/oversized Phillips bolts, like factory bolts. That’s what I’m looking for. Thanks

09-05-2018, 09:56 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Stepside fender to bed panel bolt Phillips head screwdrivers come in five sizes, numbered from 0 to 4. Phillips head screw sizes are based on numbers as well, ranging from 0 to 24. I use a P4 (or #4) on the Phillips fender screws I have. https://www.sears.com/craftsman-no-4...1&blockType=G1 They also make bits for ratchets in this size. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 09-05-2018 at 10:02 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.