PBFab driveshaft carrier bearing spacer???

[Hart_Rod]

Does anyone make and sell a driveshaft carrier bearing spacer for a PBFab rear setup?

[Willie Makeit]

I don't see a reason why this won't work. Carrier bearing dimensions shouldn't be different.

https://www.gsimfab.com/gsi-1-inch-c...4276_8760.html

If this won't work, shoot me a PM with the dimensions you need. I might be able to help.

[Hart_Rod]

Originally Posted by Willie Makeit

I don't see a reason why this won't work. Carrier bearing dimensions shouldn't be different.

https://www.gsimfab.com/gsi-1-inch-c...4276_8760.html

If this won't work, shoot me a PM with the dimensions you need. I might be able to help.

Thanks! I think I will need one at least 2-2.5" tall, but will get better measurements after I get the driveshaft back.

[SCOTI]

Why not just use some 2" square tubing?

[smbrouss70]

AZ Pro Performance has one that is either 1.5" or 2.5" tall with shims to raise them another .75"

https://azproperformance.com/product...acer-63-87-c10

[enduroride]

Hart Rod, this is what I used, just a 2" solid stock bar from a machinist I know

[NC_John]

I just made my own out of some aluminum stock.

[Hart_Rod]

Thanks guys. I ended up buying a AZPro one from a fellow board member.