47-55.1 Tricks for installing hood bumpers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MiraclePieCo · 10-16-2018, 03:21 AM

It's so hard to get those little rubber hood bumpers installed that I'm afraid I will rip the nipple off them. There must be a quick and easy way???

crossfire84 · 10-16-2018, 04:42 AM

Just put a small amount of Vaseline on each pc, they will pull through no problem.

MARTINSR · 10-16-2018, 09:36 AM

Soapy water, that way it evaporates and they stay there.

Brian

dsraven · 10-16-2018, 10:45 AM

I use soapy water for that type of deal as well. evaporates and leaves no hot day run off mess. barring that idea, I have also used a dab of synthetic brake grease, a little goes a long way. a plastic pry tool can also help work the nipple into the hole, then a little rotation as you push in slightly.

MARTINSR · 10-16-2018, 11:06 AM

Quote:

Originally Posted by dsraven

I use soapy water for that type of deal as well. evaporates and leaves no hot day run off mess. barring that idea, I have also used a dab of synthetic brake grease, a little goes a long way. a plastic pry tool can also help work the nipple into the hole, then a little rotation as you push in slightly.

The very best product EVER made for that....geez, I forget the name. It doesn't matter being it's not available anymore. It was made by 3M and in an aerosol can, crap, can't remember. Anyway, I have a can at home that I got when the EPA or who whomever made 3M take it off the market. OMG this stuff worked so good, for rubber window seals in doors, for anything rubber, it evaporated to nothing in minutes after you used it to easily slide the rubber into place. Window rubbers, anything, damn it worked good. The can I have I use like it is gold, very sparingly.

Brian

cmayna · 10-17-2018, 11:56 AM

A little spit?

**slammed57** · 10-17-2018, 05:21 PM

lick'em and stick'em in! or.....wd40 if that grosses you out

DransportGarage · 10-17-2018, 08:57 PM

Some of the repop bumpers have been on the shelf for 20+ (30+? 40+?) years now, and are pretty hard.

MARTINSR · 10-18-2018, 01:16 AM

I just cut the ones out of my hood that I installed 37 years ago!

Brian

1project2many · 10-19-2018, 07:43 AM

If I can get a pair of small, 90 degree needlenose on the backside of a hood bumper type piece a little pull usually completes installation without lube. But there are some good choices if you need to make it slippery. Tire shine has a massive amount of silicone in it and does a helluva job helping put rubber and steel together. It's also great for keeping door seals or other rubber parts from squeaking and, for the folks who live in cold states, allows one to wash a vehicle in winter without the doors freezing shut. 3M silicone grease also works but is expensive. Tire lube also works but most folks don't have access to it.

Black_Sheep · 10-20-2018, 01:25 PM

The bumpers for my 58 had a hole in the center, inserting a small punch with a blunt tip stretched the nipple and they popped right in

MiraclePieCo · 10-20-2018, 01:48 PM

Quote:

Originally Posted by Black_Sheep

The bumpers for my 58 had a hole in the center, inserting a small punch with a blunt tip stretched the nipple and they popped right in

I wondered what that hole was for!

Thanks guys, I used a combination of lubrication and needle nose pliers. The front ones fell right in, but the side holes were really tight.

**mongocanfly** · 10-21-2018, 04:53 PM

3m still makes a silicone spray that works well....we use it at work all the time...
I also just reinstalled my 60yr old axle bumps...I didn't have the spray but I filled a bowl full of hot water and let them sit 5-10 min...and the popped right in....before the hot water they were hard a s rocks

10-16-2018, 03:21 AM	#1
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Tricks for installing hood bumpers? It's so hard to get those little rubber hood bumpers installed that I'm afraid I will rip the nipple off them. There must be a quick and easy way??? Attached Images __________________ 1951 Chevy Panel Truck

10-16-2018, 04:42 AM	#2
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: Tricks for installing hood bumpers? Just put a small amount of Vaseline on each pc, they will pull through no problem. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

10-16-2018, 09:36 AM	#3
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Tricks for installing hood bumpers? Soapy water, that way it evaporates and they stay there. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-16-2018, 10:45 AM	#4
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,333	Re: Tricks for installing hood bumpers? I use soapy water for that type of deal as well. evaporates and leaves no hot day run off mess. barring that idea, I have also used a dab of synthetic brake grease, a little goes a long way. a plastic pry tool can also help work the nipple into the hole, then a little rotation as you push in slightly.

10-17-2018, 11:56 AM	#6
cmayna Registered User Join Date: Oct 2018 Location: Menlo Park, CA Posts: 90	Re: Tricks for installing hood bumpers? A little spit? __________________ Craig My truck '50 Chevy 3100-5 window If I'm not working on my truck, I'm fishing with the wife or smoking Salmon.

10-17-2018, 05:21 PM	#7
slammed57 Senior Member Join Date: Jan 2015 Location: pembroke pines, fl Posts: 707	Re: Tricks for installing hood bumpers? lick'em and stick'em in! or.....wd40 if that grosses you out __________________ My 57 current build http://67-72chevytrucks.com/vboard/s...d.php?t=662590

10-17-2018, 08:57 PM	#8
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: Tricks for installing hood bumpers? Some of the repop bumpers have been on the shelf for 20+ (30+? 40+?) years now, and are pretty hard. __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

10-18-2018, 01:16 AM	#9
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Tricks for installing hood bumpers? I just cut the ones out of my hood that I installed 37 years ago! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-19-2018, 07:43 AM	#10
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Tricks for installing hood bumpers? If I can get a pair of small, 90 degree needlenose on the backside of a hood bumper type piece a little pull usually completes installation without lube. But there are some good choices if you need to make it slippery. Tire shine has a massive amount of silicone in it and does a helluva job helping put rubber and steel together. It's also great for keeping door seals or other rubber parts from squeaking and, for the folks who live in cold states, allows one to wash a vehicle in winter without the doors freezing shut. 3M silicone grease also works but is expensive. Tire lube also works but most folks don't have access to it.

10-20-2018, 01:25 PM	#11
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: Tricks for installing hood bumpers? The bumpers for my 58 had a hole in the center, inserting a small punch with a blunt tip stretched the nipple and they popped right in __________________ Mark Brother's keeper - '58 Stepside build

10-21-2018, 04:53 PM	#13
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Tricks for installing hood bumpers? 3m still makes a silicone spray that works well....we use it at work all the time... I also just reinstalled my 60yr old axle bumps...I didn't have the spray but I filled a bowl full of hot water and let them sit 5-10 min...and the popped right in....before the hot water they were hard a s rocks Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.