47-55.1 Front accessory drive kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

obie16 · 11-26-2018, 01:03 AM

What’s everyone using for front accessory drive kits, I like the Holley mid mount system but I’m not running a/c so that one won’t work for me. And it needs to be corvette parts do to space. Thanks!

*sorry forgot to say it was a 6.0l*

NorCalGal · 11-26-2018, 02:03 AM

I used the front drive off of a 4.6 out of an s10

mikebte · 11-26-2018, 11:11 AM

^^^^^^^^^^
I used the same set up as NorCalGal. I got mine off a 93 GMC. Used the same water pump and everything off the parts truck.

Driver_WT · 11-26-2018, 11:36 AM

Me too. Parts were from a 1999 S10 with 4.3 engine. You can also buy an AC eliminator kit which provides an idler pulley where the AC compressor mounts.

65blackfleetside · 11-26-2018, 02:39 PM

Check out ICT billet. Thats who i went with. Lots of options cheaper than most of the rest. Quality is top notch.

**Dan in Pasadena** · 11-26-2018, 04:40 PM

Just another opinion but I used factory stock on my Task Force. You mostly never see the serpentine system, or at least not much of it. If you want it to be "pretty" you can have the upper pulleys or brackets polished. this is what I plan to do with mine....eventually.

I bought Vintage Air's polished AC compressor and Drier

_Ogre · 11-26-2018, 07:08 PM

i made all of mine for less than $15 mostly for bolts

**joedoh** · 11-26-2018, 07:16 PM

for your edit, try

https://www.gmperformancemotor.com/category/LS2202.html

specifically

https://www.gmperformancemotor.com/parts/19257325.html

also try

https://www.lssimple.net/

specifically

https://www.lssimple.net/purchase-co...rnator-no-belt

**Advanced Design** · 11-27-2018, 05:59 PM

Another Holley option is this https://www.holley.com/products/acce...s/parts/20-143

Though the alternator will likely get into the left inner fender. If I remember correctly you have the option for fore aft spacing too for truck, Camaro or Corvette.

11-26-2018, 01:03 AM	#1
obie16 Registered User Join Date: Jul 2009 Location: McCall, Idaho Posts: 33	Front accessory drive kits What’s everyone using for front accessory drive kits, I like the Holley mid mount system but I’m not running a/c so that one won’t work for me. And it needs to be corvette parts do to space. Thanks! sorry forgot to say it was a 6.0l Last edited by obie16; 11-26-2018 at 08:48 AM. Reason: Forgot to mention engine size

11-26-2018, 02:03 AM	#2
NorCalGal Registered User Join Date: Nov 2014 Location: Yuba City, CA. Posts: 678	Re: Front accessory drive kits I used the front drive off of a 4.6 out of an s10 Attached Images __________________ Jan's 53

11-26-2018, 11:11 AM	#3
mikebte Registered User Join Date: Oct 2011 Location: Tucson, AZ Posts: 639	Re: Front accessory drive kits ^^^^^^^^^^ I used the same set up as NorCalGal. I got mine off a 93 GMC. Used the same water pump and everything off the parts truck.

11-26-2018, 11:36 AM	#4
Driver_WT Registered User Join Date: Dec 2017 Location: River John, NS Posts: 448	Re: Front accessory drive kits Me too. Parts were from a 1999 S10 with 4.3 engine. You can also buy an AC eliminator kit which provides an idler pulley where the AC compressor mounts. __________________ 53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes

11-26-2018, 02:39 PM	#5
65blackfleetside Registered User Join Date: Nov 2015 Location: Central Florida Posts: 215	Re: Front accessory drive kits Check out ICT billet. Thats who i went with. Lots of options cheaper than most of the rest. Quality is top notch. __________________ current ride 1951 AD Chevy 5 window 2004 LS Gen 3 [/B] 1965 fleetside Sold

11-26-2018, 04:40 PM	#6
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,345	Re: Front accessory drive kits Just another opinion but I used factory stock on my Task Force. You mostly never see the serpentine system, or at least not much of it. If you want it to be "pretty" you can have the upper pulleys or brackets polished. this is what I plan to do with mine....eventually. I bought Vintage Air's polished AC compressor and Drier __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

11-26-2018, 07:08 PM	#7
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Front accessory drive kits i made all of mine for less than $15 mostly for bolts Attached Images __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

11-26-2018, 07:16 PM	#8
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: Front accessory drive kits for your edit, try https://www.gmperformancemotor.com/category/LS2202.html specifically https://www.gmperformancemotor.com/parts/19257325.html also try https://www.lssimple.net/ specifically https://www.lssimple.net/purchase-co...rnator-no-belt __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

11-27-2018, 05:59 PM	#9
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Front accessory drive kits Another Holley option is this https://www.holley.com/products/acce...s/parts/20-143 Though the alternator will likely get into the left inner fender. If I remember correctly you have the option for fore aft spacing too for truck, Camaro or Corvette. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.