Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-26-2018, 02:02 PM | #1 |
Registered User
Join Date: Nov 2018
Location: Huntsville, AL
Posts: 339
|
Help with photos of factory TH350/NP205 mount
I've just purchased a '72 Blazer and the transmission needs to be addressed first. At first it was slipping, and now I barely get any movement forward or backwards. This is complicated by the fact the PO made his own skid-plate and perhaps cross-member. I can take some pictures tonight to illustrate, but in the meanwhile I was hoping someone had some images of what this "normally" should look like underneath. Thanks!
|
11-26-2018, 06:15 PM | #2 |
Registered User
Join Date: Nov 2018
Location: Huntsville, AL
Posts: 339
|
Here are two photos found elsewhere on the board. I believe these are "factory" mounting configurations. I think what is throwing me is that I have a second cross-member behind the transfer case (which isn't in either of these photos). I believe the second cross-member is for the skid plate? Does this sound correct? As I mentioned earlier, the skid plate on mine appears to be homemade. Hopefully I'll have photos of mine tonight, but for now here's what I found from other posts:
Posted via Mobile Device Posted via Mobile Device |
11-26-2018, 06:56 PM | #3 |
Senior Member
Join Date: May 2011
Location: Greencastle PA
Posts: 6,799
|
Re: Help with photos of factory TH350/NP205 mount
Yes, you are correct the second is for the skid plate. It will look like the one in the picture but won't have the 2 side brackets that connect to the top of the frame rail.
|
11-27-2018, 07:15 PM | #4 |
Registered User
Join Date: May 2015
Location: Prescott AZ
Posts: 199
|
Re: Help with photos of factory TH350/NP205 mount
Heres some pics of the second cross member and skid plate
|
Bookmarks |
|
|