EFI fuel tanks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FAKKY · 01-07-2019, 11:52 AM

Starting to research on fuel.

Im thinking of using the TANCINC drop in pump and sender rather than external pump.

For a 300HP street only truck - do I really need a baffled EFI tank .... or can I reuse the existing tank. Not sure if that pump will work with OEM tank .... but can find out.

Else guess I'll just drop and relocate to rear like everyone else ... but the fuel fillup neck is a little harder on a suburban than "bed only" standard truck.

04ls1gto · 01-07-2019, 03:02 PM

I did the Aeromotive stealth setup in my suburban tank and it worked perfectly. Easy to install and get plumbed

**mongocanfly** · 01-07-2019, 04:08 PM

I'm running the stock tank on mine...344hp....no baffles...I've never had any issues

sweetk30 · 01-07-2019, 08:02 PM

currently running a 87 20 gal tbi tank and tbi sender with ep381 acdelco pump for 96 vortec engine . gets me the psi and flow for my aftermarket efi setup no problems. . . . other than the holley sniper sucks a$$ but thats another thread in the main engine section .

FAKKY · 01-07-2019, 08:22 PM

Thanks.

I started a general thread (non efi specific) as not have a fitment issue.

http://67-72chevytrucks.com/vboard/s...d.php?t=779126

Want to keep tank on frame rail so I can keep tire under bed. And dont want to have to deal with centering the 8.8 rear.

Thinking a shorter tank and a 2" driveshaft.

BR3W CITY · 01-08-2019, 11:55 AM

I wouldn't run a non baffled tank anymore imo, tho I run an external and use a bit more fuel than some of yall. Going from 70mph, decel down an offramp and hit a 90* intersection at the end; if i wasn't well over 1/3 tank it was possible to draw air and would stutter on the outlet of the corner. That was with a 15gal cell between the rear rails.

We added tank foam to help the issue until finally switching to a sumped/baffled/foamed cell a little while back.

01-07-2019, 11:52 AM	#1
FAKKY Registered User Join Date: Sep 2016 Location: Redington Beach Posts: 1,317	EFI fuel tanks Starting to research on fuel. Im thinking of using the TANCINC drop in pump and sender rather than external pump. For a 300HP street only truck - do I really need a baffled EFI tank .... or can I reuse the existing tank. Not sure if that pump will work with OEM tank .... but can find out. Else guess I'll just drop and relocate to rear like everyone else ... but the fuel fillup neck is a little harder on a suburban than "bed only" standard truck. __________________ FAKKY 57 PANEL BUILD

01-07-2019, 03:02 PM	#2
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: EFI fuel tanks I did the Aeromotive stealth setup in my suburban tank and it worked perfectly. Easy to install and get plumbed

01-07-2019, 04:08 PM	#3
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: EFI fuel tanks I'm running the stock tank on mine...344hp....no baffles...I've never had any issues __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-07-2019, 08:02 PM	#4
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: EFI fuel tanks currently running a 87 20 gal tbi tank and tbi sender with ep381 acdelco pump for 96 vortec engine . gets me the psi and flow for my aftermarket efi setup no problems. . . . other than the holley sniper sucks a$$ but thats another thread in the main engine section . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

01-07-2019, 08:22 PM	#5
FAKKY Registered User Join Date: Sep 2016 Location: Redington Beach Posts: 1,317	Re: EFI fuel tanks Thanks. I started a general thread (non efi specific) as not have a fitment issue. http://67-72chevytrucks.com/vboard/s...d.php?t=779126 Want to keep tank on frame rail so I can keep tire under bed. And dont want to have to deal with centering the 8.8 rear. Thinking a shorter tank and a 2" driveshaft. __________________ FAKKY 57 PANEL BUILD

01-08-2019, 11:55 AM	#6
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: EFI fuel tanks I wouldn't run a non baffled tank anymore imo, tho I run an external and use a bit more fuel than some of yall. Going from 70mph, decel down an offramp and hit a 90* intersection at the end; if i wasn't well over 1/3 tank it was possible to draw air and would stutter on the outlet of the corner. That was with a 15gal cell between the rear rails. We added tank foam to help the issue until finally switching to a sumped/baffled/foamed cell a little while back. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.