Linkage between NP205 shifter & rail differences? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Toro · 01-08-2019, 06:55 PM

I've seen two types of linkage used to connect the shift lever and the rail on the NP205. One is a flat piece with an angle bent into it, and the other is a round piece with each end turned. Were these used during different model years?

**Blazerowner** · 01-09-2019, 02:37 PM

I’ve never seen the flat one. Does it have the lugs with the pin in it? Looks like there’s a lug on the shifter.

01-08-2019, 06:55 PM	#1
Toro Registered User Join Date: Nov 2018 Location: Huntsville, AL Posts: 339	Linkage between NP205 shifter & rail differences? I've seen two types of linkage used to connect the shift lever and the rail on the NP205. One is a flat piece with an angle bent into it, and the other is a round piece with each end turned. Were these used during different model years? Attached Images

01-09-2019, 02:37 PM	#2
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,956	Re: Linkage between NP205 shifter & rail differences? I’ve never seen the flat one. Does it have the lugs with the pin in it? Looks like there’s a lug on the shifter. __________________ Kirk 72 Blazer CST 4wd highlander



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.