What bit will fit this screw? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bhap** · 02-02-2019, 07:35 PM

This is a screw from inside the door on my 62 C10. It holds the lower division bar/window run channel. It is a 1/4-20 X 1/2" and I can replace with a regular screw, but am curious what this is called and where I can find a driver or bit to turn it. Thanks for your help.

Bob

Leonard60 · 02-02-2019, 07:38 PM

It’s called a clutch some multi bit screw drivers have them

hairball · 02-10-2019, 03:48 PM

It's called a clutch head.

**The Rocknrod** · 02-10-2019, 03:51 PM

https://www.classicparts.com/1955-66...YaAjNDEALw_wcB

02-02-2019, 07:35 PM	#1
bhap Senior Member Join Date: Mar 2006 Location: Pittsburgh, PA Posts: 264	What bit will fit this screw? This is a screw from inside the door on my 62 C10. It holds the lower division bar/window run channel. It is a 1/4-20 X 1/2" and I can replace with a regular screw, but am curious what this is called and where I can find a driver or bit to turn it. Thanks for your help. Bob Attached Images

02-02-2019, 07:38 PM	#2
Leonard60 Registered User Join Date: Jun 2016 Location: Leslieville alberta Posts: 374	Re: What bit will fit this screw? It’s called a clutch some multi bit screw drivers have them

02-10-2019, 03:48 PM	#3
hairball Registered User Join Date: Nov 2018 Location: Durango Colo. Posts: 75	Re: What bit will fit this screw? It's called a clutch head.

02-10-2019, 03:51 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: What bit will fit this screw? https://www.classicparts.com/1955-66...YaAjNDEALw_wcB __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.