|
02-04-2019, 05:40 PM
|
#1 |
|
Registered User
Join Date: Jun 2018
Location: Texas
Posts: 1,353
|
Submersible Fuel Hose
Anybody know where I can get 2ft of submersible fuel hose? All I can find is 1ft and 10ft. And of course 10ft is super expensive and really all I need is like 14" of fuel line. I have a 12" piece now that is 2" too short... Of course....
I can't see paying $200 for 10ft of this line..... This is for a LS swap so high pressure 3/8" submersible fuel line is what I am looking for. Thanks! .
__________________
TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money". 
|
|
|
|
02-04-2019, 05:54 PM
|
#2 |
|
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Submersible Fuel Hose
My local Car Quest has it by the foot, 3/8" Gates p/n 27097, about $23.00 per foot. they'll cut what you want. The stuff aint cheap!
Amazon has it for &18.22 per foot. |
|
|
|
|
02-04-2019, 06:20 PM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
|
Re: Submersible Fuel Hose
I've used nylon fuel line inside a tank. Holds up fine
__________________
My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe |
|
|
|
|
02-05-2019, 09:36 AM
|
#4 |
|
Registered User
Join Date: Jun 2018
Location: Texas
Posts: 1,353
|
Re: Submersible Fuel Hose
Thanks guys, I will check with carquest. And i misspoke after thinking about my message. My tank is 13.5" deep and my hose is actually 6" long not 12". And the pump is about 4" long so a 12" piece should work just fine for me.
Thank goodness cuz your right, this stuff isn't cheap!
__________________
TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".
|
|
|
|
|
02-05-2019, 10:18 AM
|
#5 | |
|
Almost Satisfied
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
|
Re: Submersible Fuel Hose
Quote:
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." |
|
|
|
|
|
02-05-2019, 10:56 AM
|
#6 |
|
Registered User
Join Date: Jun 2018
Location: Texas
Posts: 1,353
|
Re: Submersible Fuel Hose
I set em' up, you knock em down...
__________________
TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
