63 GMC throttle pedal conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sooner71 · 03-23-2019, 03:09 PM

Hey what's up guys , I'm in need of some help. Has anyone done a gas pedal conversion. If you have please get back with me. Please. I need direction.

**The Rocknrod** · 03-23-2019, 05:34 PM

Conversion to what?

**cwcarpenter98** · 03-23-2019, 06:35 PM

Are you wanting a cable style gas pedal?

64shortbox · 03-24-2019, 12:52 AM

Are you talking about something like this?

Sooner71 · 03-24-2019, 08:33 AM

Yes, I'm looking to go cable.
After talking to the tech department at cpp ( classic performance products ), I found out that there wasn't no information on a 63 GMC throttle pedal conversion, so I had to figure out something, so I removed the original throttle assembly that was bolted to the side of the transmission tunnel. I found a flat spot next to that area and mocked up my lokar pedal and marked a line around the base of the mounting surface, then I put the plate that mounts to the firewall over the line that I marked around the base of the pedal to marke the 2 holes that needed to be drilled for the installation. Worked out perfectly.
Thanks for all y'alls responses.

03-23-2019, 03:09 PM	#1
Sooner71 Registered User Join Date: Feb 2017 Location: San antonio tx Posts: 5	63 GMC throttle pedal conversion Hey what's up guys , I'm in need of some help. Has anyone done a gas pedal conversion. If you have please get back with me. Please. I need direction.

03-23-2019, 05:34 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 63 GMC throttle pedal conversion Conversion to what? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-23-2019, 06:35 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: 63 GMC throttle pedal conversion Are you wanting a cable style gas pedal? __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-24-2019, 12:52 AM	#4
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: 63 GMC throttle pedal conversion Are you talking about something like this? Attached Images

03-24-2019, 08:33 AM	#5
Sooner71 Registered User Join Date: Feb 2017 Location: San antonio tx Posts: 5	Re: 63 GMC throttle pedal conversion Yes, I'm looking to go cable. After talking to the tech department at cpp ( classic performance products ), I found out that there wasn't no information on a 63 GMC throttle pedal conversion, so I had to figure out something, so I removed the original throttle assembly that was bolted to the side of the transmission tunnel. I found a flat spot next to that area and mocked up my lokar pedal and marked a line around the base of the mounting surface, then I put the plate that mounts to the firewall over the line that I marked around the base of the pedal to marke the 2 holes that needed to be drilled for the installation. Worked out perfectly. Thanks for all y'alls responses.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.