Question on Factory Height Jimmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ptjsk · 05-01-2019, 10:11 PM

Does anybody have the correct measurement for the factory height, measured from the center of the hub, up to the top of the arch in the fender?

Mine looks to be just a hair shy of 22.75". Pretty sure this is the original height. I just wanted to seek your opinions.

Also, no blocks in the rear.

Thanks, Pat

**truckster** · 05-01-2019, 11:27 PM

I can only measure the rear, since my front fenders aren't installed right now. I measure 24" with a 2" body lift, so I'd say you're at least in the right ballpark.

**richard2717** · 05-02-2019, 07:00 AM

Mine measures 23.5" center of hub to bottom of arch. all original from what i can tell.

Terrysch · 05-02-2019, 02:14 PM

My 72 Jimmy is also 22.75 inches. Stock. Not lifted or lowered. Terry

Ptjsk · 05-02-2019, 10:19 PM

Thanks a lot guys! Looks like it's stock height.

Pat

05-01-2019, 10:11 PM	#1
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Question on Factory Height Jimmy Does anybody have the correct measurement for the factory height, measured from the center of the hub, up to the top of the arch in the fender? Mine looks to be just a hair shy of 22.75". Pretty sure this is the original height. I just wanted to seek your opinions. Also, no blocks in the rear. Thanks, Pat Attached Images

05-01-2019, 11:27 PM	#2
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Question on Factory Height Jimmy I can only measure the rear, since my front fenders aren't installed right now. I measure 24" with a 2" body lift, so I'd say you're at least in the right ballpark. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

05-02-2019, 07:00 AM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,127	Re: Question on Factory Height Jimmy Mine measures 23.5" center of hub to bottom of arch. all original from what i can tell. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-02-2019, 02:14 PM	#4
Terrysch Registered User Join Date: Feb 2019 Location: Ozark, MO Posts: 573	Re: Question on Factory Height Jimmy My 72 Jimmy is also 22.75 inches. Stock. Not lifted or lowered. Terry

05-02-2019, 10:19 PM	#5
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Question on Factory Height Jimmy Thanks a lot guys! Looks like it's stock height. Pat



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.