Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-28-2019, 05:46 PM | #1 |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Q's about installing 80mil sound deadener
Got my Noico 80mil butyl automotive sound deadener, roller, tape, etc. and am prepping the inside roof of the cab. Scraped off all the old cloth-like material (is it fiberglass?) but in places it wasn't, there's some surface rust. I'm working to remove the surface rust, and here's the question: should I just put this stuff straight onto the bare steel, or should I apply a rust-inhibiting paint or primer first, or something else? I figure the sound deadener might affix itself better to the bare steel, but am unsure if it's best to leave the steel in an untreated condition.
|
05-28-2019, 06:01 PM | #2 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Q's about installing 80mil sound deadener
I'd put on rust inhibiting/stabilizing paint just as a precaution. Anything you can do to stop or slow down rust is going to help the truck last a lot longer.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
05-28-2019, 08:21 PM | #3 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Q's about installing 80mil sound deadener
I believe the sound deadened will adhere better on a clean, painted surface
|
05-28-2019, 10:00 PM | #4 |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Re: Q's about installing 80mil sound deadener
Sounds like that is prevailing opinion. As long as the sound deadener can adhere to it, that's the plan.
|
05-28-2019, 11:01 PM | #5 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Q's about installing 80mil sound deadener
I've never tried rust converters or even the paints that say they will stop rust but getting all the loose stuff off and using a product that says it will convert/stop the rust seems to make a lot of sense.
Let us know how that particular sound deadener works out. We are always up for valid reports on how sound deadener or heat blocking products actually work.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
05-29-2019, 12:51 PM | #6 | |
Registered User
Join Date: Dec 2017
Location: River John, NS
Posts: 448
|
Re: Q's about installing 80mil sound deadener
Quote:
I have also used POR15, but that project is only about a year old, so no long term experience to report. Wade
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes |
|
05-29-2019, 05:21 PM | #7 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Q's about installing 80mil sound deadener
fyi once installed the original rubber trim won't fit
i used black door edge molding to finish off my 58 headliner sound deadener covered in ultrasuede
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
05-29-2019, 06:05 PM | #8 |
Registered User
Join Date: Dec 2017
Location: River John, NS
Posts: 448
|
Re: Q's about installing 80mil sound deadener
Very nice.
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes |
05-30-2019, 01:25 PM | #9 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Q's about installing 80mil sound deadener
door edge trim also comes in chrome if your a chrome type of guy
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
06-03-2019, 05:48 AM | #10 |
Registered User
Join Date: Sep 2017
Location: Lynnwood, WA
Posts: 148
|
Re: Q's about installing 80mil sound deadener
I think what you've done there looks awesome, but your mention of the original rubber trim confuses me. I don't think I'm dealing with any rubber trim on a '51. It's just two cardboard strips with a center frame and rear frame with screws.
|
06-05-2019, 02:21 PM | #11 | |
Registered User
Join Date: Apr 2019
Location: New Boston, Tx
Posts: 198
|
Re: Q's about installing 80mil sound deadener
Quote:
One of, if not the very best heat blocker is 1/4" thick cork board. |
|
Bookmarks |
Tags |
interior, noise dampening, rust, sound deadener |
|
|