Just when you think your out (64 Fleetside) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Softpatch · 06-21-2019, 10:37 PM

I just picked this 1964 Fleetside custom
No running gear was an Auto Non PS/PB
.
I'm going to merge this very rusty (Michigan) 02 silverado
.

.

.

.

.

.

LostMy65 · 06-21-2019, 11:47 PM

Are you saying you're going to put it on the silverado frame?

Softpatch · 06-22-2019, 12:59 AM

Quote:

Originally Posted by LostMy65

Are you saying you're going to put it on the silverado frame?

.
Yes.?
.

**spudder** · 06-22-2019, 08:25 AM

I think I would try to keep the original frame. The frames on the '99-'07 trucks are very bad about rusting through.
If you are set on using the '02 frame, make sure it doesn't have serious rust issues in the boxed areas.

**Clyde65** · 06-22-2019, 08:56 AM

Stance on the newer is 6” wider than the 60-66

LostMy65 · 06-22-2019, 11:42 AM

**Captainfab** · 06-22-2019, 11:06 PM

The '88 and up frames are drastically different from the '63-'87 frames. You are in for a LOT of fabricating and work.

LostMy65 · 06-23-2019, 12:54 PM

Btw... The fender emblems are from a 66.

66x3 · 06-23-2019, 03:26 PM

Very rusty?!?! Man if you were from Michigan that would be considered a pretty darn clean truck! No rust on the box,rockers still on, that thing must have migrated your way a long time ago.

66x3 · 06-23-2019, 03:27 PM

Cab corners too!

Softpatch · 06-23-2019, 11:26 PM

Thank you for that ....
The dash cluster should have been a give a way.
you are correct it is indeed a 1966 not a 1964.

and thanks for the heads up on the wider frame on the 02
.
.....W

LostMy65 · 06-24-2019, 03:55 PM

Personally, I think the 66 is best of the generation.
If you decide to skip the frame swap idea, are wanting to stay with the 3/4 ton, or were you thinking of converting it to a 1/2 ton?

Softpatch · 06-25-2019, 12:11 AM

I don't have a clue.?
I have a problem I like to rescue cars/Trucks that have been passed on.

The 02 silverado 1500 was a $200 truck its is rusty it has a 4.3 and a 4L60E
Trans need love
it's to light for what a need..

the 66 custom was rusting in a yard under a pine tree the owner just wanted the Drive trane 454/T400
then back out under the tree..... I had to save it
.
not my favrote yr I'm a knee knocker guy
.
My old truck
.

sprinter11r · 06-25-2019, 10:10 PM

once you are in, you are never out..... even if you think you are...lol

Softpatch · 07-02-2019, 11:19 PM

Continued
.
http://67-72chevytrucks.com/vboard/n...=newthread&f=6
.

chevy_mike · 07-03-2019, 10:32 AM

Closing this thread as OP started a new thread instead of updating this one.

Part II found at http://67-72chevytrucks.com/vboard/s...d.php?t=789617

06-21-2019, 10:37 PM	#1
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Just when you think your out (64 Fleetside) I just picked this 1964 Fleetside custom No running gear was an Auto Non PS/PB . I'm going to merge this very rusty (Michigan) 02 silverado . . . . . . . . . __________________ My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341 Last edited by Softpatch; 06-21-2019 at 10:47 PM.

06-21-2019, 11:47 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Just when you think your out (64 Fleetside) Are you saying you're going to put it on the silverado frame? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-22-2019, 08:25 AM	#4
spudder Active Member Join Date: Aug 2012 Location: Central Illinois Posts: 103	Re: Just when you think your out (64 Fleetside) I think I would try to keep the original frame. The frames on the '99-'07 trucks are very bad about rusting through. If you are set on using the '02 frame, make sure it doesn't have serious rust issues in the boxed areas.

06-22-2019, 08:56 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Just when you think your out (64 Fleetside) Stance on the newer is 6” wider than the 60-66 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

06-22-2019, 11:42 AM	#6
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Just when you think your out (64 Fleetside) __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-22-2019, 11:06 PM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Just when you think your out (64 Fleetside) The '88 and up frames are drastically different from the '63-'87 frames. You are in for a LOT of fabricating and work. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-23-2019, 12:54 PM	#8
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Just when you think your out (64 Fleetside) Btw... The fender emblems are from a 66. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-23-2019, 03:26 PM	#9
66x3 Registered User Join Date: Dec 2018 Location: Bellevue, MI Posts: 118	Re: Just when you think your out (64 Fleetside) Very rusty?!?! Man if you were from Michigan that would be considered a pretty darn clean truck! No rust on the box,rockers still on, that thing must have migrated your way a long time ago.

06-23-2019, 03:27 PM	#10
66x3 Registered User Join Date: Dec 2018 Location: Bellevue, MI Posts: 118	Re: Just when you think your out (64 Fleetside) Cab corners too!

06-23-2019, 11:26 PM	#11
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Re: Just when you think your out (64 Fleetside) Thank you for that .... The dash cluster should have been a give a way. you are correct it is indeed a 1966 not a 1964. and thanks for the heads up on the wider frame on the 02 . .....W __________________ My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341

06-24-2019, 03:55 PM	#12
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Just when you think your out (64 Fleetside) Personally, I think the 66 is best of the generation. If you decide to skip the frame swap idea, are wanting to stay with the 3/4 ton, or were you thinking of converting it to a 1/2 ton? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-25-2019, 12:11 AM	#13
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Re: Just when you think your out (64 Fleetside) I don't have a clue.? I have a problem I like to rescue cars/Trucks that have been passed on. The 02 silverado 1500 was a $200 truck its is rusty it has a 4.3 and a 4L60E Trans need love it's to light for what a need.. the 66 custom was rusting in a yard under a pine tree the owner just wanted the Drive trane 454/T400 then back out under the tree..... I had to save it . not my favrote yr I'm a knee knocker guy . My old truck . __________________ My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341

06-25-2019, 10:10 PM	#14
sprinter11r Registered User Join Date: Dec 2011 Location: lincoln, missouri Posts: 72	Re: Just when you think your out (64 Fleetside) once you are in, you are never out..... even if you think you are...lol

07-02-2019, 11:19 PM	#15
Softpatch Registered User Join Date: Sep 2013 Location: Vashon WA Posts: 969	Re: Just when you think your out (64 Fleetside) Continued . http://67-72chevytrucks.com/vboard/n...=newthread&f=6 . __________________ My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341

07-03-2019, 10:32 AM	#16
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Just when you think your out (64 Fleetside) Closing this thread as OP started a new thread instead of updating this one. Part II found at http://67-72chevytrucks.com/vboard/s...d.php?t=789617 __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.