The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-23-2019, 08:10 PM   #1
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Most Desirable Flywheel to add to 350 crate motor?

So I have 2 to choose from, the first is P/N 3789733 and is the factory flywheel out of the 1966 292 C10. The other flywheel is P/N 3973456N and is the factory flywheel out of a 1971 307 C10. Either could be resurfaced properly with no heat check marks or major issues.

I thought I read that the "N" suffix denotes a nodular iron flywheel and those are stronger and more desirable?
Bushman66 is offline   Reply With Quote
Old 07-23-2019, 09:41 PM   #2
Blue666(2)
Registered User
 
Join Date: Sep 2014
Location: Valparaiso, IN
Posts: 300
Re: Most Desirable Flywheel to add to 350 crate motor?

1st. Determine if your crate engine needs an internally or externally balanced flywheel.

2nd. For me, the most desirable is the flywheel is the one that works with my bell housing/ clutch disc/ pressure plate/ transmission & starter. If you don't have these parts yet, check your specs as you buy these items.
Blue666(2) is offline   Reply With Quote
Old 07-23-2019, 11:25 PM   #3
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Re: Most Desirable Flywheel to add to 350 crate motor?

Quote:
Originally Posted by Blue666(2) View Post
1st. Determine if your crate engine needs an internally or externally balanced flywheel.

2nd. For me, the most desirable is the flywheel is the one that works with my bell housing/ clutch disc/ pressure plate/ transmission & starter. If you don't have these parts yet, check your specs as you buy these items.
It's a 350, and they are both internally balanced. I have the pressure plate and clutch disc, I haven't laid them side by side yet, but will t make sure they are the same as the parts I removed from the 292. I'll also make sure the disc slips easily onto the input shaft. As far as I can tell, the flywheels are identical and either would work (Chevy made things pretty easy), was more asking if there is a "desirable" casting number, like there is with blocks or heads. Thanks!
Bushman66 is offline   Reply With Quote
Old 07-23-2019, 11:48 PM   #4
WorkinLonghorn
Senior Member
 
WorkinLonghorn's Avatar
 
Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,886
Re: Most Desirable Flywheel to add to 350 crate motor?

Why would you put an 11" flywheel on a 350? They came stock with 12", at least in '69 they did-
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.
WorkinLonghorn is offline   Reply With Quote
Old 07-24-2019, 01:25 AM   #5
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Re: Most Desirable Flywheel to add to 350 crate motor?

Quote:
Originally Posted by WorkinLonghorn View Post
Why would you put an 11" flywheel on a 350? They came stock with 12", at least in '69 they did-
?? They are both 14" flywheels.
Bushman66 is offline   Reply With Quote
Old 07-26-2019, 06:12 PM   #6
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,776
Re: Most Desirable Flywheel to add to 350 crate motor?

Is it possible the difference is in how much they weigh? I would guess a 292 may have a heavy one since it was designed for hard work at low rpm.
I had 3 flywheels to choose from when I did my clutch and I could see that one of them was thicker than the other two. Ultimately, I decided to leave that one on the shelf since my truck is more of a cruiser than a worker these days.
AcampoDave is offline   Reply With Quote
Old 07-27-2019, 07:43 PM   #7
Bushman66
Registered User
 
Join Date: Apr 2019
Location: Phx, Arizona
Posts: 131
Re: Most Desirable Flywheel to add to 350 crate motor?

Quote:
Originally Posted by AcampoDave View Post
Is it possible the difference is in how much they weigh? I would guess a 292 may have a heavy one since it was designed for hard work at low rpm.
I had 3 flywheels to choose from when I did my clutch and I could see that one of them was thicker than the other two. Ultimately, I decided to leave that one on the shelf since my truck is more of a cruiser than a worker these days.
I ended up doing just that, except I chose the thicker of the 2 GM flywheels (the one off the 292) and got it resurfaced. Anyone want a brand new Made in China flywheel cheap?
Bushman66 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com