|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-13-2019, 10:44 AM
|
#1 |
|
Registered User
Join Date: Oct 2018
Location: Trenton MO
Posts: 201
|
Steering Knuckle Stops
I was cleaning some small parts yesterday, and saw one of mine is broken. Anyone know where to get a couple? Thanks!
This is for a 1947 3600.... |
|
|
|
10-13-2019, 01:46 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,741
|
Re: Steering Knuckle Stops
They aren't much more than a piece of bent flatbar with a hole drilled in them.
I don't have any on the axle under my 48 because the guy who put the new king pins in it lost them before I got it. I didn't notice that until I found out I could turn the wheels way too far.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
10-13-2019, 05:56 PM
|
#3 |
|
Registered User
Join Date: Oct 2018
Location: Trenton MO
Posts: 201
|
Re: Steering Knuckle Stops
Yeah, figured I could make a couple, but wanted to see if there were any out there first!
|
|
|
|
|
10-13-2019, 07:56 PM
|
#4 |
|
Registered User
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,486
|
Re: Steering Knuckle Stops
you might contact [url]www.droppedaxles.com. Sid most likely would have some laying around
Last edited by nvrdone; 10-13-2019 at 07:58 PM. Reason: spelling |
|
|
|
|
10-13-2019, 08:38 PM
|
#5 | |
|
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: Steering Knuckle Stops
Quote:
Last edited by mick53; 10-13-2019 at 08:41 PM. Reason: info |
|
|
|
|
|
10-13-2019, 09:02 PM
|
#6 |
|
Registered User
Join Date: Feb 2012
Location: Petawawa On
Posts: 7
|
Re: Steering Knuckle Stops
The steering stops for the 3/4t and 1t are slightly different. These are off a 1950.
Dave |
|
|
|
|
10-14-2019, 08:46 AM
|
#7 | |
|
Registered User
Join Date: Oct 2018
Location: Trenton MO
Posts: 201
|
Re: Steering Knuckle Stops
Quote:
|
|
|
|
|
|
10-16-2019, 02:39 AM
|
#8 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,741
|
Re: Steering Knuckle Stops
AH, the day is complete, I learned something new. I figured that they were like the ones that Mick53 showed.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
10-16-2019, 11:49 AM
|
#9 | |
|
Registered User
Join Date: Oct 2018
Location: Trenton MO
Posts: 201
|
Re: Steering Knuckle Stops
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
