I need info on a ls 6.0l & 700r4 trans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hvacfatboy · 10-14-2019, 09:33 PM

I need to know what needs to be done to get the drive shaft to not hit the trailing arm cross member. I have a 72 2wd Blazer that i am putting a 6.0L LS motor with the msd box and a carb instead of fuel injection, my problem is that the tail shaft of the trans is very close to the trailing arm crossmember. I need any ideas to get the motor and trans lower. Thanks in advance for any help and info.

*YoungPup1977* · 10-20-2019, 08:56 AM

provide pics of how the engine is mounted to the frame.

10-14-2019, 09:33 PM	#1
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	I need info on a ls 6.0l & 700r4 trans I need to know what needs to be done to get the drive shaft to not hit the trailing arm cross member. I have a 72 2wd Blazer that i am putting a 6.0L LS motor with the msd box and a carb instead of fuel injection, my problem is that the tail shaft of the trans is very close to the trailing arm crossmember. I need any ideas to get the motor and trans lower. Thanks in advance for any help and info.

10-20-2019, 08:56 AM	#2
YoungPup1977 Account Suspended Join Date: Jun 2015 Location: No longer here Posts: 1,000	Re: I need info on a ls 6.0l & 700r4 trans provide pics of how the engine is mounted to the frame.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.