Sheet metal hardware question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusty one · 10-24-2019, 06:50 PM

I'll be starting to mock up the front sheet metal and would like to know if anyone ordered the hardware. Ill be needing hardware for the front outter fenders inner fenders,radiator support ,radiator all the sheet metal that's bolted to the front cowl and bumper hardware

Did anyone purchase this hardware in a kit or will all the bolts /nuts/ shims have to be ordered individually?
Part #'s for the hardware will be a big help!
Thankyou in advance

**The Rocknrod** · 10-25-2019, 07:42 AM

Go agead and buy the 50 pack and get it over with - https://www.ebay.com/sch/m.html?_ssn...lange&_sacat=0
You'll probably need this as well - https://www.ebay.com/itm/6-3-8-16x1-...MAAOxyJX1TE5dM
Your welcome

kens65fb · 10-25-2019, 08:16 AM

Quote:

Originally Posted by The Rocknrod

Go agead and buy the 50 pack and get it over with - https://www.ebay.com/sch/m.html?_ssn...lange&_sacat=0
You'll probably need this as well - https://www.ebay.com/itm/6-3-8-16x1-...MAAOxyJX1TE5dM
Your welcome

The first link brings you to a metric assortment

**The Rocknrod** · 10-25-2019, 10:33 AM

Ya I checked again, I don't know why it does that. You can search for 5/16-18X3/4 large flange in "theboltbarn" eBay store. They're out of Cleveland, OH. The only place I found with the large flange bolts (at the time). I had later found them somewhere else I forget but they were all black and I didn't want those. Dog points? I believe are original however if that's a concern. You can buy originals (take offs) from Aspen Auto Parts in Arizona and clean them up. Good luck and have fun.

roll_the_dice · 10-25-2019, 11:16 AM

Thats a good price for the 50 pack. (Bolt Barn 50 pack)

They also have zinc and stainless.

If I didn't already have mine I would get those!

Rusty one · 10-25-2019, 11:17 AM

Quote:

Originally Posted by The Rocknrod

Ya I checked again, I don't know why it does that. You can search for 5/16-18X3/4 large flange in "theboltbarn" eBay store. They're out of Cleveland, OH. The only place I found with the large flange bolts (at the time). I had later found them somewhere else I forget but they were all black and I didn't want those. Dog points? I believe are original however if that's a concern. You can buy originals (take offs) from Aspen Auto Parts in Arizona and clean them up. Good luck and have fun.

Thanks for the links..
Looking to use new bolts, not doing a original restoration..

Rusty one · 10-25-2019, 11:29 AM

Quote:

Originally Posted by The Rocknrod

Ya I checked again, I don't know why it does that. You can search for 5/16-18X3/4 large flange in "theboltbarn" eBay store. They're out of Cleveland, OH. The only place I found with the large flange bolts (at the time). I had later found them somewhere else I forget but they were all black and I didn't want those. Dog points? I believe are original however if that's a concern. You can buy originals (take offs) from Aspen Auto Parts in Arizona and clean them up. Good luck and have fun.

Forgot to ask...would you know how many of them I would need? 50?

**The Rocknrod** · 10-25-2019, 12:57 PM

Like I said get the 50 pack. I nickle and dime'd it all the way and should have just bought the fifty and got it over with.

**Clyde65** · 10-25-2019, 03:47 PM

I got this from a friend, hope it helps.

Rusty one · 10-25-2019, 05:30 PM

Quote:

Originally Posted by Clyde65

I got this from a friend, hope it helps.

Thanks for that!...Is that something that can be purchased? If would you know where from?

roll_the_dice · 10-25-2019, 06:18 PM

I bought this kit from Classic Parts. It has the same list that is posted above.

oldtrux · 10-25-2019, 06:30 PM

allens fasteners,great prices and they have the proper flange head bolts in stainless

Rusty one · 10-25-2019, 06:40 PM

Quote:

Originally Posted by roll_the_dice

I bought this kit from Classic Parts. It has the same list that is posted above.

Thankyou .. does that kit include bumper bolts and radiator support bolts as well? Didn't check the link as yet.

**The Rocknrod** · 10-25-2019, 07:02 PM

If you dont care about the proper "large" flange head bolts, either companies list above would be good.

roll_the_dice · 10-25-2019, 07:23 PM

Quote:

Originally Posted by Rusty one

Thankyou .. does that kit include bumper bolts and radiator support bolts as well? Didn't check the link as yet.

No bumper bolts and radiator bolts...I am pretty sure it is exactly as listed above.

Rusty one · 10-25-2019, 08:17 PM

Thankyou for all the replies...I'll do a search for bumper bolts and see what comes up.

10-24-2019, 06:50 PM	#1
Rusty one Registered User Join Date: Apr 2012 Location: NYC Posts: 103	Sheet metal hardware question. I'll be starting to mock up the front sheet metal and would like to know if anyone ordered the hardware. Ill be needing hardware for the front outter fenders inner fenders,radiator support ,radiator all the sheet metal that's bolted to the front cowl and bumper hardware Did anyone purchase this hardware in a kit or will all the bolts /nuts/ shims have to be ordered individually? Part #'s for the hardware will be a big help! Thankyou in advance

10-25-2019, 07:42 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Sheet metal hardware question. Go agead and buy the 50 pack and get it over with - https://www.ebay.com/sch/m.html?_ssn...lange&_sacat=0 You'll probably need this as well - https://www.ebay.com/itm/6-3-8-16x1-...MAAOxyJX1TE5dM Your welcome __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-25-2019, 10:33 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Sheet metal hardware question. Ya I checked again, I don't know why it does that. You can search for 5/16-18X3/4 large flange in "theboltbarn" eBay store. They're out of Cleveland, OH. The only place I found with the large flange bolts (at the time). I had later found them somewhere else I forget but they were all black and I didn't want those. Dog points? I believe are original however if that's a concern. You can buy originals (take offs) from Aspen Auto Parts in Arizona and clean them up. Good luck and have fun. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-25-2019, 11:16 AM	#5
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Sheet metal hardware question. Thats a good price for the 50 pack. (Bolt Barn 50 pack) They also have zinc and stainless. If I didn't already have mine I would get those! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

10-25-2019, 12:57 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Sheet metal hardware question. Like I said get the 50 pack. I nickle and dime'd it all the way and should have just bought the fifty and got it over with. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-25-2019, 03:47 PM	#9
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Sheet metal hardware question. I got this from a friend, hope it helps. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

10-25-2019, 06:18 PM	#11
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Sheet metal hardware question. I bought this kit from Classic Parts. It has the same list that is posted above. __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

10-25-2019, 06:30 PM	#12
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 555	Re: Sheet metal hardware question. allens fasteners,great prices and they have the proper flange head bolts in stainless

10-25-2019, 07:02 PM	#14
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Sheet metal hardware question. If you dont care about the proper "large" flange head bolts, either companies list above would be good. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-25-2019, 08:17 PM	#16
Rusty one Registered User Join Date: Apr 2012 Location: NYC Posts: 103	Re: Sheet metal hardware question. Thankyou for all the replies...I'll do a search for bumper bolts and see what comes up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.