wheel studs 7/16-20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 02-16-2020, 01:47 PM

Looking for some new oe wheel studs, checked rock auto, nothing close. Will check NAPA on monday.

any help?

**Getter-Done** · 02-16-2020, 02:05 PM

Length of Knurl ? Total Length of stud?

What Vehicle ?

Jeg's and other places have them if you know the length.

Link:https://www.jegs.com/i/JEGS/555/6510...%26%20Hardware

Hope this helps.

.

hemi43 · 02-17-2020, 10:39 AM

The first thing I did was get rid of those 7/16 studs. I converted mine to 1/2-20. Peace of mind especially with larger tires.
Might want to convert yours over.

The best place to find which stud you need is the Dorman website. You need to know thread size, length, and most important the knurl diameter.

https://www.dormanproducts.com/pages/products/wheel-hardware/index.aspx

**jaros44sr** · 02-17-2020, 10:55 AM

Thanks for the link, I'll spend some time there, always wanted to go to 1/2", just never got around too it

02-16-2020, 01:47 PM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	wheel studs 7/16-20 Looking for some new oe wheel studs, checked rock auto, nothing close. Will check NAPA on monday. any help? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-16-2020, 02:05 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,413	Re: wheel studs 7/16-20 Length of Knurl ? Total Length of stud? What Vehicle ? Jeg's and other places have them if you know the length. Link:https://www.jegs.com/i/JEGS/555/6510...%26%20Hardware Hope this helps. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

02-17-2020, 10:39 AM	#3
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: wheel studs 7/16-20 The first thing I did was get rid of those 7/16 studs. I converted mine to 1/2-20. Peace of mind especially with larger tires. Might want to convert yours over. The best place to find which stud you need is the Dorman website. You need to know thread size, length, and most important the knurl diameter. https://www.dormanproducts.com/pages/products/wheel-hardware/index.aspx Last edited by hemi43; 02-17-2020 at 10:46 AM.

02-17-2020, 10:55 AM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: wheel studs 7/16-20 Thanks for the link, I'll spend some time there, always wanted to go to 1/2", just never got around too it __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.