|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-09-2020, 05:00 PM
|
#1 |
|
68 C/10
Join Date: Oct 2003
Location: Houma Louisiana
Posts: 367
|
Wheel stud size question
I purchased a set of drilled and slotted front rotors, they came with 7/16 x20 wheel studs. I want to upgrade to 1/2 x20 and need to know what knurl diameter works with a .535 hole in the rotor. The 7/16 studs measure .555 which seems big to me. Any suggestions?
__________________
(2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car |
|
|
|
04-09-2020, 05:42 PM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,678
|
Re: Wheel stud size question
The factory stud is a 610-186 with a .472 knurl. With a .535 hole and a similar stud (going to 1/2'') I would look at the 610-163 (dorman) or Napa 641-1269 with a .545 knurl
|
|
|
|
|
04-10-2020, 09:50 AM
|
#3 |
|
68 C/10
Join Date: Oct 2003
Location: Houma Louisiana
Posts: 367
|
Re: Wheel stud size question
I have been looking for that exact size with no luck thanks a bunch. Picking them up today.
__________________
(2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
