Killed a jimmy... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 11-11-2020, 10:45 PM

Trust me, i saved anything that was good enough to save. No title and rusty. At least some parts will live on...
Enjoy the pics...

**1rippen6** · 11-12-2020, 12:26 AM

Cut the filler neck section out the truck guys buy it to move their fuel tank. Looks like the bucket seat channel under the floor is salvageable. Tail light sections are a wtb item pretty regularly.

**too much stuff** · 11-12-2020, 10:34 AM

Quote:

Originally Posted by 1rippen6

Cut the filler neck section out the truck guys buy it to move their fuel tank. Looks like the bucket seat channel under the floor is salvageable. Tail light sections are a wtb item pretty regularly.

Good advice. Is the bucket seat channel the same for utility seats?

hemi43 · 11-12-2020, 11:35 AM

Grab the door reinforcements.

**1rippen6** · 11-12-2020, 12:22 PM

Quote:

Originally Posted by too much stuff

Good advice. Is the bucket seat channel the same for utility seats?

Yes, sport and utility track width is the same but the utility tracks are longer. The back mounting holes are farther back on the floor.

**maldo** · 11-12-2020, 05:46 PM

ooooohhh The humanity, grab the ash try.

**72gmguy** · 11-12-2020, 06:13 PM

Sad day. Always wanted a Jimmy...not that one.

Jeffh · 11-12-2020, 06:25 PM

Someday your gonna wish you hadn't did that. I did the same thing to a rough 57 Chevy convertible around 1985. Probably coulda got 10K for it now.....

**too much stuff** · 11-12-2020, 06:28 PM

Quote:

Originally Posted by hemi43

Grab the door reinforcements.

I saved both doors for parts and grabbed the little pieces screwed to the body.

Quote:

Originally Posted by 1rippen6

Yes, sport and utility track width is the same but the utility tracks are longer. The back mounting holes are farther back on the floor.

I got it off there, but it will need some repair. Glad you mentioned grabbing it as i forgot about it.

Quote:

Originally Posted by maldo

ooooohhh The humanity, grab the ash try.

I actually cut the whole dash out.

Quote:

Originally Posted by 72gmguy

Sad day. Always wanted a Jimmy...not that one.

Not too late, could be yours... A little mechanical work and some buffing and it should clean up...

**Ol Blue K20** · 11-16-2020, 10:59 AM

it's a sad day.

11-11-2020, 10:45 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Killed a jimmy... Trust me, i saved anything that was good enough to save. No title and rusty. At least some parts will live on... Enjoy the pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-12-2020, 12:26 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Killed a jimmy... Cut the filler neck section out the truck guys buy it to move their fuel tank. Looks like the bucket seat channel under the floor is salvageable. Tail light sections are a wtb item pretty regularly.

11-12-2020, 11:35 AM	#4
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Killed a jimmy... Grab the door reinforcements.

11-12-2020, 05:46 PM	#6
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 703	Re: Killed a jimmy... ooooohhh The humanity, grab the ash try.

11-12-2020, 06:13 PM	#7
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: Killed a jimmy... Sad day. Always wanted a Jimmy...not that one. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

11-12-2020, 06:25 PM	#8
Jeffh Registered User Join Date: Sep 2017 Location: Red Oak Iowa Posts: 225	Re: Killed a jimmy... Someday your gonna wish you hadn't did that. I did the same thing to a rough 57 Chevy convertible around 1985. Probably coulda got 10K for it now.....

11-16-2020, 10:59 AM	#10
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Killed a jimmy... it's a sad day. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.